Active Member
|
[China]
Address: Room 702-3,Ningbo Lishi Commercial building,Lane 578,45# Tiantong South Road,Yinzhou District,Ningbo,China
Contact name:Tina Kui
VAINO INTERNATIONAL LIMITED |
|
|
High precison control PE PP daily products varibale pump injection molding machine K2-320
ADJUSTMENT UNIT:
Automatic mold height adjustment save time and cost during the mould change
CLAMPING UNIT:
The plates are designed using FEM software,ensuring a stable and rigid clamping system.
Five point inward moving double toggle system ensures high rigidity and precision for mould clamping and also reducing stress and strain effect
HYDRAULIC UNIT:
The hydraulic system using the world famous pump and control valve can control the machine running precisely, ensuring the precision, reliability and durability of whole machine
INJECTION UNIT
Dual-pillar supporting and dual cylinder injection balance devices ensure the stress on screw balanced during injection
Special screw and barrel designs are available for processing different material requirements
ELECTRONICALLY CONTROLLED UNIT
High response PLC control system with frequency of 32MHZ
5-10inch LCD display ,showing independent CPU control
Master control frequency of 140hmz scan time 1 ms, The progress of fast response, high control accuracy
100-200group mold parameter storage space
Quality control management, the main process parameters and the curves shows a list of statistics
PID barrel temperature control function automatically adjusts the parameters
CPU controller and the display are independent and reliable
A large color lcd screen enhances clear display and supports multi-language compatibility
The control system also supports remote monitor ,in the event of a control problem ,the machine can be connected to the internet through a special interface.(optional)
A screen saver function extends the LC life
Ultra brighter led is provided for input and output point inspection.
Providing convenient indication of the machine’s operation and machine service
A data hardware lock is provided to prevent unauthorized people from modifying the molding parameter and effecting the machines performance
Close loop PID barrel temperature control
Dust and waterproof control cabinent provide a near and tiny enclosure all electrical control components
OTHERS:
By-pass filter in use
Pass filter with ultra-fine, ultra long reach hydraulic oil
Life increase drain intervals of three to ten times more
SPECIFICATIONS
| SPECIFICATIONS | ||||
| DESCRIPTION | UNIT | K2-320 | ||
| INJECTION | A | B | C | |
| SHOT VOLUME | CM3 | 1062 | 1231 | 1414 |
| SHOT WEIGHT | G | 966 | 1120 | 1286 |
| (PS) | OZ | 33.7 | 39.2 | 44.9 |
| SCREW DIAMETER | MM | 65 | 70 | 75 |
| INJECTION PRESSURE | MPA | 175 | 152 | 133 |
| SCREW L:D RATIO | 21:1 | 21:1 | 19.6:1 | |
| SCREW STROKE | MM | 320 | ||
| SCREW SPEED (STEPLESS) | R/MIN | 0~150 | ||
| CLAMPING UNIT | ||||
| CLAMPING FORCE | KN | 3200 | ||
| OPENING STROKE | MM | 615 | ||
| PLATEN SIZE | MM*MM | 945*945 | ||
| SPACE BETWEEN TIE BARS | MM*MM | 660*660 | ||
| MOLD THICKNESS (MIN-MAX) | MM | 250~670 | ||
| MAX.DAYLIGHT | MM | 1285 | ||
| HYDRAULIC EJECTION STROKE | MM | 160 | ||
| HYDRAULIC EJECTION FORCE | KN | 77 | ||
| POWER UNIT | ||||
| HYDRAULIC SYSTEM PRESSURE | MPA | 17.5/36.7 | ||
| PUMP MOTOR(V/S) | KW | 30/36.7 | ||
| HEATING CAPACITY | KW | 21.5 | ||
| NUMBER OF TEMP CONTROL ZONES | 5+(NOZZLE ) | |||
| GENERAL | ||||
| DRY-CYCLE TIME | SEC | 5 | ||
| OIL TANK CAPACITY | L | 500 | ||
| MACHINE DIMENSIONS | MXMXM | 6.8*1.6*2.2 | ||
| MACHINE WEIGHT | KG | 13000 | ||
