Active Member
|
[China]
Address: Room 702-3,Ningbo Lishi Commercial building,Lane 578,45# Tiantong South Road,Yinzhou District,Ningbo,China
Contact name:Tina Kui
VAINO INTERNATIONAL LIMITED |
|
|
high performance saving energy Plastic Injection Moulding Machinery with M430
Detailed Product Description
Enviromental protection-high energy saving
High performance energy saving result realized the reduction of cost
Not only save energy, but also realized the precise speed and pressure control
High efficiency, lower oil temperature ,make oil talk much smaller, extend the use of hydraulic oil and elements
HIGH ENERGY SAVINGS
Under normal operating conditions,compared with conventional hydraulic injection molding machines,energy saving of 20-80% can be achieved.
MOLDING STABILITY
Compared with conventional injection molding machines,repeatability is greatly improved due to ervo motor closed-loop control
QUICK RESPONSE
Featuring a dynamic servo motor with a response time of only 0.05sec
QUIET OPERATION
Machine runs much lower noise levels, particularly in low speed applications
RELIABLE HOLDING PRESSURE
Compared with traditional hydraulic machine,the holding pressure is more stable and does not have limitation
BETTER OIL TEMPERATRURE STABILITY
The servo system only delivers hydraulic oil as it is needed for the various functions,This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
COMPONENT
| COMPONENT | BRAND&ORIGINAL | ||
| hydraulic system | Servo | ||
| hydraulic motor | INTERMOT-ITALY-CHINA | ● | |
| servo motor control system | HUICHUAN/PHASE-CHINA | ● | |
| hydraulic pump | fixed Pump | VICKERS OR YUKEN | / |
| gear pump | SUMITOMO-JAPAN | ● | |
| hydraulic direction valve | NORTHMAN-TAIWAN | ● | |
propotional flow control valve&propotiona l pressure control valve | HNC-TAIWAN FOR BIG MACHINE, SMALL MACHINE USE DONGFENG-CHINA | / | |
| mould adjust hydraulic motor | INTERMOT-CHINA | ● | |
| hydraulic safety valve | NORTHMAN-TAIWAN | ● | |
| electric system | |||
| computer/controller | TECHMATION-TAIWAN | ● | |
| relay | SCHNEIDER-GERMANY | ● | |
| main switch | LS-KOREA | ● | |
| linear transducer | GEFRAN-ITALY | ● | |
| limited switch | PANASONIC-JAPAN | ● | |
| breaker | CHENTAI-CHINA | ● | |
| electric motor | ZHONGDA-CHINA | / | |
| others | |||
| High pressure hydraulic pipe | GOODYEAR-USA | ● | |
| seals | VALQUA-JAPAN | ● | |
| pressure meter | Tecsis-USA | ● | |
| automatic lubrication | SL-CHINA | ● | |
| screw | JINGXING-CHINA 38CrMoAlA | ● | |
SPECIFICATION
| MODEL | M430 | ||||
| A | B | C | D | ||
| INJECTION UNIT | |||||
| SCREW DIAMETER | mm | 65 | 70 | 75 | 80 |
| SCREW L/D RATIO | L/D | 24 | 22 | 20 | 19.2 |
| SHOT VOLUME(THEORETICAL) | ㎤ | 1261 | 1462 | 1679 | 1910 |
| INJECTION WEIGHT(PS) | g | 1160 | 1345 | 1544 | 1757 |
| INJECTION PRESSURE | Mpa | 194 | 168 | 146 | 128 |
| INJECTION RATE | g/sec | 206 | 238 | 274 | 312 |
| SCREW SPEED | rpm | 150 | |||
| CLAMPING UNIT | |||||
| CLAMP TONNAGE | KN | 4300 | |||
| TOGGLE STROKE | mm | 700 | |||
| MIN.MOLD HEIGHT | mm | 280 | |||
| MAX.MOLD HEIGHT | mm | 780 | |||
| SPACE BETWEEN TIE BARS | mm | 750X710 | |||
| EJECTOR TONNAGE | KN | 100 | |||
| EJECTOR STROKE | mm | 200 | |||
| EJECTOR NUMBER | PC | 13 | |||
| OTHERS | |||||
| MAX.PUMP PRESSURE | Mpa | 16 | |||
| HEATER POWER | KW | 23.5 | |||
| PUMP MOTOR POWER | KW | 37 | |||
| OIL TANK CUBAGE | L | 630 | |||
| MACHINE DIMENSION(LxWxH) | M | 7.5X1.65X2.35 | |||
| MACHINE WEIGHT | T | 13.2 | |||
Selling points
Better molding stability
Compared with conventional injection molding machines , repeatability is greatly improved to servo motor closeloop control.
More fast cycle
valve panel design in bigger hole with bigger oil pipe.Oil go though the valve more fast flow and the
Machine action more goes more faster in mould open and ejector process.
Mould thickness fully-automatic adjustment by sensor,wheel and moto,more accurate
Install screw rotation speed sensor ,can see the real material charging status in the controller.
platen drawing
