Active Member
|
[China]
Address: 3rd Floor,Zhixinmao Technology Park,Chuangxin Road,Tangxiachong,Bao'an District,Shenzhen,China
Contact name:Zhang
Shenzhen Zenhon Technology CO.,LTD |
|
|
Over Single CAT5e/6(200M) , 4Kx2K TCP/IP , HDMI Extender
Introduction
The HDMI Extender over single CAT5e/6 is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing CAT 5e/6 cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 340MHz. The HDMI Transmitter and Receiver, over ONE CAT5e/6 extender is your substantial HDMI extender tool. The HDMI Extender also support IR re-transmitting, so you can control the Source which is 200 meters outside using the HDMI extender.
Specification
| Length of CAT-6 cable between Transmitter and Receiver | Up to 200 meters |
| HDMI Input | 4Kx2K@30Hz/1080p/1080i/720p/576p/576i/480p/480i |
| Support audio format input | DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby*AC3/DSD |
| HDMI Output | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support audio format output | LPCM7.1/DTS/Dolby-AC3/DSD |
| Max bandwidth | 340MHz |
| Max baud rate | 10.2Gbps |
| Input Video signal | 0.5~1.5Volts p-p |
| Output DDC signal | 5Volts p*p (TT1L) |
| Input/Output HDMI cable distance | ≤20m AWG26 HDMI standard cable |
| Max working current | 800mA |
| Power adapter format | Input:AC (50HZ, 60HZ) 100V*240V; Output: DC5V/1A |
| Operating Temperature range | (-15 to +55℃) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
Features
1.Signal transmission :CAT5e or CAT6(recommended) cables up to 200 meters instead of HDMI cables are connected between TX and RX Extender.
2.Support HDMI1.4,HDCP1.4 protocol compliant.
3.Support input/Output Resolution :
4Kx2K@30Hz/1080p/1080i/720p/576p/576i/480p/480i;
4.Support CEC.
5.Support 20~60KHz IR working.
6.protocol compliant TCP/IP one transmitter and multiple receivers,
with a maximum of 253 receivers.
7.Audio format support :
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
8.No loss of quality.
9.Installs in minutes.
10.Need DC 12V/1A power supply.
Panel Descriptions
Please study the panel drawings below and become familiar with the signal
input(S),output(S)and power requirements.
Power --------------------------------------Power Indicator
STA --------------------------------------Working Indicator
Reset ------------------------------------------Reset button
HDMI Input -------------------------------HDMI Input port
HDMI Output ------------------------------HDMI Loopout
Fiber Out --------------------------------------Fiber output
IR-TX -----------------------------------------IR transmitter
DC/12V -----------------------------------Power Input port
Power --------------------------------------Power Indicator
STA --------------------------------------Working Indicator
Reset ------------------------------------------Reset button
HDMI Output ------------------------------HDMI Loopout
IR-RX --------------------------------------------IR receiver
Fiber Input --------------------------------------Fiber Input
DC/12V -----------------------------------Power Input port
CONNECT AND OPERATE
Before installation, please make sure all devices you wish to connect have been turned off.
6.01.Connect HDMI signal source to the transmitter of HDMI extender.
6.02.Use fiber cable(Recommend:SC) to connect transmitter and receiver
of HDMI Extender.
6.03.Connect the display equipment with HDMI connector to the receiver of
HDMI extender.
6.04.Power on all connected devices, Choose the input of the display device
to its HDMI channel.
