|
[China]
Trade Verify
Address: Shenzhen Omini Technology Co., Ltd 605, Tongxin Technology Building, Qiaotou Community, Fuhai Street, Baoan District, Shenzhen
Contact name:Xu
Shenzhen Omini Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Rogers RO3003+RO4835+Isola 370HR PCB
6 Layer Rogers RO3003+RO4835+Isola 370HR PCB for 24g radar antenna pcb, reverse radar pcb
Quick details:
Model : Rogers RO3003+RO4835+Isola 370HR Hybrid PCB
DK : 3.48+3.00
Structure : 2L rogres ro4350B+4L Fr4+2L rogers ro4835
Layer : 8Layers Finished
Thickness : 2.0mm
Material CoThickness :0.5oz
Finished Co Thickness : 0.5oz,1oz
SurfaceTreatment :Immersion Glod
Min Trace / Space : 3.5mil/3.5mil
Min Hole : Laser Hole 0.1mm
Application :24g radar antenna pcb, reverse radar pcb
Certificate: TS16949.ISO14001.ROHS. ISO9001
Color: Green, White, Blue, Black, Red, Yellow
Package: Vacuum packing
Description of Rogers RO3003+RO4835+Isola 370HR PCB
The dielectric loss of Rogers ro3003 PCB is very low. Even if the working frequency reaches 10 GHz, the dielectric loss factor is only 0.0013. Moreover, ro3003 also has excellent electrical and mechanical properties. At the same time, the laminate has high cost performance, mainly for commercial microwave and RF applications.
Rogers ro3003pcb is made of PTFE Composites Based on ceramic
filling. The melting point is as high as 327 degree Celsius. It has
strong acid-base resistance and hightemperature resistance, which
ensures the normal operation of the circuit in harsh environment.
Therefore, it can be used as an ideal circuit material for special
applications. In addition, the thermal expansion coefficient (CTE)
of ro3003 in X and Y directions is 17 ppm / degree Celsius, which
is equivalent to that of copper. The shrinkage of one inch material
after etching and baking is less than 0.5 mil. The thermal
expansion coefficient in Z direction is 24ppm / degree Celsius,
which can ensure the stability of electroplated through-hole even
in severe thermal environment.
Because the step phenomenon of dielectric constant of PTFE glass
cloth material near room temperature is eliminated, the change of
dielectric constant of ro3003 with temperature is very stable.
Regardless of the dielectric constant, Rogers ro3003 PCB material
has stable mechanical properties, which ensures that designers will
not encounter warpage or reliability problems when developing
multilayer boards.
Rogers ro3003 PCB material can be processed by standard PTFE PCB
technology. Its typical applications are: automotive radar, GPS
antenna, power amplifier and antenna in cellular communication
system, patch antenna in wireless communication, live satellite,
remote meter reading, power backplane, and data link of wired
system.
| Application | Use Frequency |
| Cellular & Pager Telecom | 1-3 GHz |
| GPS | 1.57/1.22GHz |
| Cars, individuals receive satellite | 2.4 GHz |
| Low noise block downconverter (LNB/LNA) | 2-3GHz |
| Direct broadcast satellite (DBS) system | 13 GHz |
| Families receiving satellite | 12-14 GHz |
| Wireless carry communication antenna system | 14 GHz |
| Very small aperture terminal (VSAT) | 12-14 GHz |
| Individuals receive base stations, or satellite launch | 13-24GHz |
| Digital microwave system | 10-38 GHz |
| Car Avoidance system (CA), | 75 GHz |
Specification Of Omini High Speed PCB Printed Circuit Board
| Layer | 2-24 layer |
| Material | Rogers: 4350B, 5880, 4003C, SY SCGA-500, S7136, Arion, Taconic |
| Board thickness | 0.4mm-5.0mm |
| Max.finished board side | 457mm*610mm |
| Min.drilled hole size | 0.25mm |
| Min.line width | 0.075mm(3mil) |
| Min.line spaceing | 0.075mm(3mil) |
| Surface finish/treatment | Electroless/immersion gold/ENIG/Immersion silver/Organic solderability |
| Copper thickness | 0.5 oz - 2.0oz |
| Solder mask color | green/black/white/red/blue/yellow |
| Inner packing | Vacuum packing, Plastic bag |
| Outer packing | Standard carton packing |
| Hole tolerance | PTH:±0.076, NTPH:±0.05 |
| Certificate | UL, ISO9001, ISO14001, RoHS, CQC |
| Profiling Punching | Routing, V-CUT, Beveling |
| Assembly Service | Providing OEM service to all sorts of printed circuit board assembly |
FAQ:
Q1:Does Omini have enough capacity to produce high-quality products?
A: Omini has 20 years of history in manufacturing PCB, more than 200 employees and 10,000㎡ factory area.We got the UL, ISO9001 certificates, and our production is sold abroad. We have engouh machines & equipment to ensure the quality, please check our Production Equipment list picturers.
Q2:How long does customers need to wait for the quotation and lead time?
A: We have a prefessional group to deal with your inquiry. In our working time, we will reply to your email within 30 minutes to show we have received your inquiry, Then we will send you our quotation in no more than 6 hours. Please noticed our working time is Monday to Friday, 8am to 24pm.
Q3:How can I make sure my PCB gerber is safety?
A: We promise we won't divulge your gerber to the 3rd party, one of our responsibilities is protecting customer information privacy and security, customer information can be included: company name, address, number, trademark, ect. And we could sign NDA with client if necessary.
