Home Companies ONESEINE TECHNOLOGY CO.,LTD

Rogers 4350 5.8G Sensor PCB Rigid Radar Circuit Board Fabrication Service

ONESEINE TECHNOLOGY CO.,LTD

Contact Us

[China] country

Trade Verify

Address: Address:Room624,Fangdichan development building,Guicheng south,Nanhai,Foshan,China

Contact name:Tracy

Inquir Now

ONESEINE TECHNOLOGY CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Rogers 4350 5.8G Sensor PCB Rigid Radar Circuit Board Fabrication Service

Country/Region china
City & Province foshan
Categories Electronic Products & Components Processing
InquireNow

Product Details

Rogers 4350 5.8G Sensor PCB Rigid Radar Circuit Board Fabrication Service

 

 

Quick Details

 

Place of Origin:Shenzhen, China (Mainland)

Base Material:RO4350B

Copper Thickness:0.5oz - 2.0oz

Board Thickness:0.4mm - 5.0mm

Min. Hole Size:6mil

Min. Line Width:3mil

Min. Line Spacing:3mil

Surface Finishing:ENIG, Immersion silver, Immersion tin, OSP

PP:Rogers 4450F, Domestic-(25FR), Domestic-(RF-27), Domestic-(6700)

Solder Mask Color:Green, White, Blue, Black, Red, Yellow

Silkscreen Color:White, Black, Yellow

 

Introduction:

 

High frequency board usually use FR4 glass fiber lamination, but also the whole of the epoxy glass cloth repression, more uniform color the entire pcb board, bright. Density larger than the low frequency pcb board

High-frequency electronic devices is the development trend, especially in the growing wireless networks, satellite communications, and information products to high speed and high-frequency, and voice communications products to large capacity and fast transmission of wireless, video, and data normalization.

Therefore, the development of next-generation products require high frequency board, satellite systems, mobile phone base stations and other communications products received must be applied to high-frequency circuit boards, and the inevitable rapid development in the coming years, will be a large demand for high-frequency board.

 

Material:

 

(1) The dielectric constant (Dk) must be small and very stable, usually the smaller the better signal transfer rate

(2) The dielectric loss (Df) must be small, which mainly affects the quality of signal transmission, the smaller dielectric loss the smaller signal loss

(3) Consistent with the thermal expansion coefficient of copper

(4) Low water absorption, high water absorption will affect the dielectric constant and dielectric loss at the time of moisture.

(5) Other heat resistance, chemical resistance, impact strength, peel strength, etc. must also be good.

Induction/sensor lamp is using imported technology and MCU circuit design, active infrared work type, have good stability, strong anti-interference characteristics, with infrared decoding, widely used in high demanding commercial and industrial applications. It is a new generation of green energy-saving lighting.

With induction control switch lights, needn't to manually operate, for example, voice control, light control, temperature control, etc. all belong to the induction lamp

Use launch&receive active infrared technology, integrated codec launch, decodes received control output, making powerful with 8-bit microcontroller, using industrial level chip, load capacity, strong anti-jamming capability, suitable for any place.It can turn on lighting automatically ,and delay off automatically after people leave, eliminate human waste of energy, and extend the service life of electrical energy, convenient security in one of the function.

It is actually an automatic switching control circuit

 

 

RT/duriod

 

Rogers RT/duroid® high-frequency circuit materials are filled PTFE (irregular glass or ceramic) composite coversfor use in high reliability, aviation and defense applications. The RT/duroid types have a long industry nearness of providing high-reliability materials with predominant performance. This kind of material has several benefits:

1 Low electrical loss,
2. Low moisture absorption,
3. Stable dielectric constant (Dk) over a wide frequency range, and
4. Low outgassing for space applications.

RO3000

RO3000 laminates are ceramic filled PTFE composites intended for use in the commercial microwave and RF applications. R03000 series laminates are circuit materials with very consistent mechanical properties regardless of the dielectric constant selected. Due to this characteristic, when designing multi-layer boards with varying dielectric constants, there will be very little issues if any at all The dielectric constant VS temperature of RO3000 series materials is very stable. RO3000 laminates also are available in a wide range of dielectric constants (3.0 to 10.2). The most common applications are:

1. Surface mount RF components,
2.GPS antennas, and
3. Power amplifiers.

RO4000

RO4000 laminates and pre-pregs possess favorable properties that are highly useful in microwave circuits and instances where controlled impedance is needed. This series of laminates are very price optimized and are also fabricated using standard FR4 processes which makes it suitable for multi-layer PCBs. Additionally, it can be processed lead-free. The series of RO4000 laminates offer a range of dielectric constants (2.55-6.15) and are available with UL 94 V-0 flame retardant versions. The most popular applications of this are:

1. RFID chips,
2. Power amplifiers,
3. Automotive radars, and
4. Sensors.

TMM®
Rogers TMM® thermoset microwave laminates fuse dielectric constant uniformity, low thermal coefficient of dielectric constant (Dk), and a copper matched coefficient of thermal expansion. Because of their electrical and mechanical stability, TMM high-frequency laminates are perfect for high-reliability strip-line and micro-strip applications. This kind of material has several benefits:

1. Wide range of dielectric constants (Dks),
2.Excellent mechanical properties, cold flow, and resists creep,
3. Exceptionally low thermal coefficient of Dk,
4. Coefficient of thermal expansion fit to copper taking into account high reliability of plated through-holes,
5. Available copper clad in larger formats, allowing the use of standard PCB subtractive processes,
6. No wreck to materials during fabrication and assembly processes,  Resistant to process chemicals,
7. Thermoset resin for reliable wire bonding,
8. No specialized production techniques required,
9. TMM 10 and 10i laminates can replace alumina substrates, and
10. RoHS compliant, environmentally friendly.Below is a table that shows the characteristics of various types of PCB materials.

 

 

Hot Products

Rogers 4003C 0.2mm Small PCB Board Manufacturer Rogers 4003C 0.2mm Small PCB Circuit Board ...
Rogers 4350B DK 3.48 DF 0.0031 0.1-1.5mm HIGH FREQUENCY PCB Boards Specification: Base material ...
Single Sided roger 4003c material PCB Fabrication Quick detail: Layer 1 Material Rogers 4003 Solder ...
Rogers 4350b Dielectric Constant Laminate High Frequency PCB Board Quick detail: Material:Rogers4350...
Rogers 4350 5.8G Sensor PCB Rigid Radar Circuit Board Fabrication Service Quick Details Place of ...
Rogers 4350 0.762mm 4 Layer Blind Hole HDI PCB Board For Bank of the Secret Key Buried Blind hole ...