Active Member
|
[China]
Address: No.102,Xinyou North Road,Xinwu District,Wuxi City,Jiangsu P.R. China.
Contact name:Yolanda Wu
Wuxi KAWE intelligent equipment Co., Ltd. |
|
|
5 axis CNC PLASMA CUTTING MACHINE for steel pipe
Summarize
KPGS-600/5 5 axis CNC steel pipe intersecting line cutting machine is CNC controlled steel pipe intersecting line cutting machine, through the keyboard input data to the computer,after correct calculation, including opening groove intersecting line cutting. Self-centering chuck can clamp φ 60mm- φ 600mm pipe diameter, the longest length of the pipe can be processed is 12m. In addition, it also has many functions, such as pre-cutting, pipe torsion Angle setting, automatic speed regulation, etc., to simplify the cutting operation.
Branch pipe and main pipe machining can change the groove Angle cutting. Cutting torch on the track is the stroke of 12m, can be cut at any position on the track processing.
There are 4 groups of lifting and holding rollers on the pipe bench, the position of the workpiece can be adjusted more accurately, and the jump of the pipe can be reduced when the pipe rotates. The operation of moving, setting and moving the pipe is very simple.
The CNC pipe intersecting line cutting machine can not only cut by flame, but also by plasma cutting, which greatly improves the production efficiency.
Equipment application introduction:
It is mainly used for thermal cutting of pipe end intersecting line and pipe system pipe intersecting line hole (including groove).
Applicable workpiece material: low-carbon steel, stainless steel tube(need to optional plasma cutting function)
Main technical parameters
| Processing pipe diameter | Φ60-600mm |
| Pipe thickness | 5-20mm(plasma cutting depends on the plasma power supply situation) |
| Pipe length( MAX) | 12000mm |
| Pipe weight( MAX) | 5000kg |
| Four-claw self-centering chuck | 1 set |
| Inner diameter of chuck | 200mm |
| Pipe bracket | 4 groups |
| Servo motor | 5 sets |
| Computer control system | F6600 |
| Intersecting line cutting software | 1 group |
| Cutting line speed | 100-3000mm/min |
| Longitudinal movement speed | 0-6000mm/min |
| Power supply | 3P 380V/50HZ |
| Ground resistance | ≤3 OHms |
Swing Angle of cutting torch along the axial plane of pipe (Groove Angle + cross Angle) control range | 35-145°(±55°) |
Swing Angle of cutting torch along radial plane of pipe (Groove Angle + cross Angle) Control range | 35-145° (±55°) |
FAQ
1. Are you factory or foreign trade company?
We are factory ,do both domestic and froeign market
2. What shall we do if don't know how to operate your machine after
bought from you?
We have detailed installation and operating instructions attached,
also comes with video, it is very simple. We have telephone and
email support at 24 hours a day. If you need our engineer go to
your factory installation and training , that all no problems
3. What's the quality of your products?
For the machine frame all made by ourself, quality and delivery
time have enough guarantee . Also our products passed CE
certification, exported to lots countries around the world, such as
Russia, Iraq, Belgium, Kazakhstan, Korea, etc. You can rest assured
with the quality absolutely.
