Active Member
|
[China]
Address: 716, Building 39, Liandong u Valley, No.100, Fengbin Road, Liangxi District, Wuxi City
Contact name:Liu
Dongtai Yaoqiang machinery Co.,Ltd |
|
|
Table Type Servo drive CNC Flame Plasma Cutting Machine for Steel Structure and metal plate
The desktop CNC plasma cutting machine series is my company absorbing domestic and foreign advanced hardware and software technology, developed for supporting metal structure processing a high efficiency steel plate automatic cutting equipment, can be vertical and horizontal straight line cutting or arc curve of arbitrary azimuth cutting, cutting and high precision surface roughness, deformation is small.
This machine has the advantages of reasonable structure, simple
operation and advanced technology.
| Table width | 2000mm |
| Transverse effective cutting width | 1500mm |
| Table length | 6000mm |
| Vertical effective cutting length | 6000mm |
| Rails models | Precision, high-side rail |
| Drive mode | Bilateral servo drive |
| Console location | Independent console |
| Electric control part | 1 |
| Plasma power supply | Matching |
| CNC cutting torch mobile | 1 |
| CNC cutting torch lifter | -Gas collision desktop special |
| Vertical and horizontal drive system | Panasonic servo motor 3 |
| Mechanical transmission | Precision bevel gear and linear guide rail 4 |
| Lateral pipeline transmission | Drag chain 1 |
| Vertical line drive | Drag chain 1 |
Configuration
| Automatic Arc voltage to increase | Hongyu reach 300 1 |
| Plasma cutting torch anti-collision device | De Tong 1 |
| Vertical and horizontal electronic limit switches | 4 |
| Longitudinal and transverse mechanical stop device | 4 |
| Programming nesting software | INTESGNPS |
Technical Specifications
| The effective cutting width | 1500mm |
| Effective cutting length | 2000mm |
| Idle running speed | 0-20000mm/min |
| Plasma cutting materials | Carbon steel, stainless steel |
| Plasma cutting torch lifting distance | ≤100mm |
| Plasma cutting torch lifting | Automatic Arc voltage to increase lift |
| Machine accuracy standards | Meet the JB/T5102-1999 |
| Torch up and down motion of vertical tolerance | ±0.2mm |
| Torch of trajectory tracking accuracy tolerance | ±0.5mm |
| Machine precision | Side length ( four sides ) 1000*1000 Line speed 500-800mm/min |
| Line detection: point offset tolerance | ±0.5mm |
| Line detection: the straightness tolerance | ±0.2mm |
| Line detection: roundness tolerance | ±0.5mm |
| Line detection: diagonal tolerance | ±0.5mm |
| Setting error | ±5% |
| Roughness of cutting ( quality cutting) | Ra ≤12.5μm |
| Led install side rail straightness | 0.4mm/10000mm |
| Deputy rail lateral deviation from straightness | 1mm/20000mm |
| Leading axles mounted horizontally rail level accuracy | ±0.1mm/1000mm |
| Main Rails two flatness tolerance | 1mm |
