|
[China]
Trade Verify
Address: No 1, Dalongtan East Road, Pengzhou Industrial Park, Chengdu, China.
Contact name:Kitty Woo
YouYuan Industry Co.,Limited |
|
Verified Suppliers
|
|
|
High Speed Automatic Tissue Paper Slitter Rewinder Machine Pneumatic Slitting
Description
YY-FQB800 Tissue Paper Slitter Rewinder Machine is developed to slit and rewind the big tissue paper rolls from paper making machines into smaller paper rolls for different kinds of tissue paper converting. With this machine, you can easily slit the big tissue paper rolls you buy or you make into smaller tissue paper rolls accoding to your converting requirements. It is a bridge between tissue paper making and tissue paper converting.Our Tissue Paper Slitter Rewinder Machine uses the international advanced pneumatic slitting knives to ensure very smooth slitting ends.
Technical Specification
| Nr. | Description | Data |
| 1 | Machine name | YY-FQB800 Tissue Paper Slitter Rewinder Machine |
| 1.1 | Design speed | 900m/min |
| 1.2 | Operation speed | 800m/min |
| 1.3 | Roll balancing speed | 1000 m/min |
| 1.4 | Maximum jumbo width | 2900mm |
| 1.5 | Jumbo diameter | ≤￠2500mm |
| 1.6 | Minimum slitting width | 180mm |
| 1.7 | Maximum winding diameter | ￠1500mm |
| 1.8 | Operation basis weight | 13-80g/ |
Winder
| Item | Description | Data |
| 1 | drum roll | 2 pcs |
| 1.1 | drum roll width | 2950mm |
| 1.2 | fomer drum roll material | seamless tube |
| 1.3 | fomer drum roll surface | Sand blasting&chrome |
| 1.4 | groove | No |
| 1.5 | back drum roll material | seamless tube |
| 1.6 | back drum roll surface | sand blasting treatment&chrome |
| 1.7 | goorve | no |
| 2 | spreader roll | 1pc |
| 2.1 | spreader roll face length | 2950mm |
| 2.2 | surface material | rubber |
| 2.3 | drive | V-belt |
| 3 | rider roll | 1pc |
| 3.1 | rider roll face length | 2950 |
| 3.2 | rider roll material | aluminum tube |
| 3.3 | rider roll pressure control | Pneumatic |
| 4 | core shaft | 2 pcs |
| 4.1 | diameter core shaft | 3 inches(76mm paper core) |
| 4.2 | structure core shaft | expansion shaft |
| 5 | core chuck | 1 set |
| 5.1 | core chuck pressure control | Pneumatic |
| 5.2 | core chuck up&down | Pneumatic contorl synchonize |
| 6 | Reel control | 1 set |
| 6.1 | Control interface | 10.4inch touch panel |
| 6.2 | counting way | length or diameter |
| 6.3 | tension control | electric |
| 6.4 | density control | drum roll speed and rider roll pressure |
| 6.5 | auto cut off system | automatic |
| 6.6 | paper core auto load | Yes |
| 6.7 | blow | yes |
Slitting System
| Nr. | Description | Data |
| 1 | slitter type | top knife :pneumactic knife. bottom knife is disc. |
| 1.1 | minimum slitting width | 180mm |
| 1.2 | maximum slitting width | 2900mm |
| 1.3 | bottom knife drive | synchronize belt |
| 1.4 | top knife diameter | 150 |
| 1.5 | top knife quantity | 12 sets |
| 1.6 | bottom knife diameter | 260 |
| 1.7 | bottom knife quantity | 50sets |
| 1.8 | bottom knife shaft | 1pc |
1.9
| bottom knife shaft material | seamless tube |
| 1.10 | top knife lubricatino | yes |
| 2 | spreader roll | 1pc |
| 2.1 | spreader roll face length | 2950mm |
| 2.2 | surface material | rubber |
| 2.3 | drive | V-belt |
| 3 | Paper guide roll | 1 pc |
| 3.1 | paper guide roll face length | 2950 |
| 3.2 | paper guide roll groove | yes |
Unwinders
| Nr | Description | Data |
| 1 | unwind quantity | 2 group(the picture is 4 group) |
| 1.1 | maximum jumbo width | 2900mm |
| 1.2 | minimum jumbo weight | 3T with reel spool |
| 1.3 | maximum jumbo diameter | 2500mm |
| 2 | drive belt quantity | 2 pcs |
| 2.1 | belt width | 250mm |
| 2.2 | drive way | independent drive motor |
| 3 | unwind material | steel plate structure |
| 3.1 | empty spool kick off device | yes |
| 3.2 | jumbo spool locking device | pneumatic |
| 3.3 | jumbo alignment | electrical |
| 4 | brake | disc braking |
| 4.1 | every group brake qty | 1 set |
| 4.2 | drive | pneumatic |
Trim System
| Item | Description | Data |
| 1 | collecting tank | 1 pc |
| 1.1 | trim pressing | No |
| 2 | trim nozzle movable | no |
| 2.1 | trim nozzle material | stainless steel |
| 2.2 | static eliminator | no |
| 3 | trim blower | high pressure centrifugal fan |
| 3.1 | blower power | 11KW |
6. UNLOAD deck
| item | description | data |
| 1 | unload deck | 1set/hydraulic |
Our Production Process and Delivery to Customer
We have our own CNC to do parts machining, and then shot blasting, we do baking paint for all the parts. Next we start the assembly, when the machines are finished, we will do the commissioning and test running. If customer will not come to our factory to check and approve, we will send machine photos and videos to customer before packaging and shipment.
After Sale Services
Spare Parts
YouYuan provides around-the-clock parts support to keep your business moving.
Installation
We're here to get you started on the right foot.
Complete installation and start-up support
Start-up and calibration support
Training
