Active Member
|
[China]
Address: Add: F4, Bld.4, Xifa B industry Zone, Yintian, Xixiang, Bao'an, Shenzhen, China.
Contact name:Frank
Shenzhen Handar Optical Technology Co.,Ltd |
|
|
Industrial PoE Ethernet Switch 4 x 10/100Base-T & 1 x 100Base-Fx FE SFP
Description
The HD-1F4E/PSE-AF-F device is a kind of industrial PoE switch,
it supports four 10Base-T/100Base-TX ports and one 100Base-FX
Fiber port. These converters are classified as power source equipment
(PSE), and when used in this way provide 15.4 watts to
IEEE802.3af compliant powered devices (PDs), eliminating the need
for additional wiring. It support LFP function, it is easy to check the
network connection status, it also support CE, FCC standard,
adopt industry standard design, IP40 protection, rugged high-strength
metal case, power supply input(48VDC), -40 to 85°C working temperature.
The converters support IEEE802.3/ IEEE802.3u/ IEEE802.3x
with 10/100/M, full/half-duplex, and MDI/MDI-X auto-sensing,
providing a complete solution for your industrial Ethernet network.
Features
• Support four 10/100Base-TX ports and one 100Base-FX fiber port
• Support IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3af, store and forward
• Compatible with IEEE802.3af(15.4W)
• Ethernet port support 10/100M self-adaption and PoE function
• Support LFP (Link Fault Pass-Through)
• Support huge increase in packet mode
• DC10V-48V power input, supporting redundant dual power input .
• IP40 protect grade, high strength iron shell, DIN Rail installation
• Industrial grade 4 design
Specifications:
| Ethernet Standard | IEEE802.3 10Base-T Ethernet |
| IEEE802.3u100Base-TX/FX Fast Ethernet | |
| IEEE802.3x Flow control | |
| IEEE802.3af | |
Interface
| 4 10/100Base-T RJ45 ports: For connecting STP/UTP category-5 twisted pairs |
| 1 100Base-Fx FE SFP port : For connecting 155M SFP transceivers & fiber cable | |
| PoE | IEEE802.3af / 15.4W per port |
| Exchange Attribute | Forward speed: 0.744Mpps |
| Transmit mode: store and forward | |
| System exchange bandwidth: 1.4Gbps | |
| MAC address table: 1K | |
| Memory: 512K | |
| Exchange delay time: < 3μs | |
| Jumbo Frames : 9K Bytes | |
| Transmission Distance | Twisted cable: 100M (standard CAT5/CAT5e cable) |
| Multi-mode fiber : 850nm / 550m (OM1 OM2) | |
| Single-mode fiber : Up to 120Km depends on SFP transceivers used | |
| LED Indicator | Interface indicator: Tx port Link/Act (1~4) |
| Power supply indicator: PWR | |
| Interface indicator: Fx port Link/Act | |
| Power Supply | Input Voltage: DC 10V～DC 58V |
| Type of input: Terminal block | |
| Full-load consumption (NO PD): <3W | |
| Full-load consumption (FULL PD): <100W | |
| Mechanical Structure | Shell: IP40 protect grade, aluminum shell |
| Installation: DIN-Rail | |
| Shipping Weight: 0.85 kg/pcs | |
| Size (L×W×H): 143mm×104mm×48mm | |
| Environment | Working temperature: -40～85℃ |
| Storage temperature: -40～85℃ | |
| Relative Humidity: 5%~95 %( no condensation) | |
| Industry Standard | EMI: |
| FCC CFR47 Part 15, EN55022/CISPR22, Class A | |
| EMS: | |
| IEC61000-4-2(ESD):±8kV(contact),±15kV(air) | |
| IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) | |
| IEC61000-4-4 (EFT) :Power Port:±4kV / Data Port: ±2kV | |
| IEC61000-4-5 (Surge):Power Port:±2kV/DM, ±4kV/CM / Data Port: ±2kV | |
| IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) | |
| IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) | |
| Machinery: | |
| IEC60068-2-6 (Vibration) | |
| IEC60068-2-27 (Shock) | |
| IEC60068-2-32 (Free Fall) |
Competitive Advantage:
1. Our factory certificated by ISO9001:2015.
Industrial PoE Ethernet Switch 10-100M
