Active Member
|
[China]
Address: Add: F4, Bld.4, Xifa B industry Zone, Yintian, Xixiang, Bao'an, Shenzhen, China.
Contact name:Frank
Shenzhen Handar Optical Technology Co.,Ltd |
|
|
HD/3G SDI Fiber Converter RS485 data to fiber HD video optical converter
Featuring transmission of high resolution content with highest
quality, OLYCOM OM615-1S3GWT/R 3G-SDI fiber optic video extender
offers long-range transmission capacity over extreme distance of up
to 40km. The 3G-SDI optical extender automatically recognized and
transmits SDI, HD-SDI, 3G-SDI signals, with embedded audio and
metadata, and is fully compliant with SMPTE 259M, 292M, 424M and
ITU digital video standards.
To optimize SDI signal transmission, the input signals are
automatically equalized and re-clocked. The OM615-1S3GWT/R 3G-SDI
fiber optic video extender is ideally suited for use in digital
signage, broadcast, staging, and HD CCTV applications. And fiber
optic transmission, which is inherently secure and immune to
outside interference, is favored in government, military, and
medical environments.
1. Extends SDI, HD-SDI, and 3G-SDI signals to very long distances over a single fiber via 3G video SFP
2. Supports multi-rate SDI at rates up to 2.97 Gbps and complies with SMPTE 259M, 292M, 424M and ITU digital video standards
3. Input equalization and re-clocking on buffered outputs
4. Real-time status LED indicators
5. Redundant output for previewing on a local monitor
6. Hot-Swappable
7. 1ch RS485 data to fiber
Product Name | SDI optical transmitter and receiver |
Model No. | OM615-S1V1D-T/R |
Optical | |
Wavelength | |
Fiber Type and Distance | multimode (50/125um) 5Km, ( 62.5/125um) 2Km single mode (9/125um)
20Km / 40Km |
Transmitting Power | -5dBm to -10dBm
|
Receiving Sensitivity | -26dBm to -30dBm |
Return Loss | > 14dB
|
Jitter | < 0.2UI |
Interface | LC |
Video | |
Signal type | HD-SDI, SDI, and 3G-SDI digital video signals |
Gain | Unity |
Resolution | 8 or 10 bits, automatic |
Data rates | 270 Mbps, 1.485 Gbps, 2.970 Gbps |
Operation standards | SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120 |
Auto data rate lock | Yes |
Video Input - Transmitter | |
Number/signal type | 2 single link SDI, HD-SDI, or 3G-SDI digital component video 1 for
Tx, 1 for local preview |
Interface | 2 female BNC |
Impedance | 750ohms |
Data rates | 19 Mbps to 2.97 Gbps |
Nominal level | 0.8 Vp-p |
Minimum/maximum levels | 0.5 V to 1.0 Vp-p |
Return loss | ≥15 dB @ 5 MHz to 1.5 GHz, ≥10 dB @ 1.5 GHz to 3.0 GHz |
Input cable equalization | Automatic for up to -30 dB of cable loss |
Video Output - Receiver | |
Number/signal type | 2 single link SDI, HD-SDI, or 3G-SDI digital component video 1 for
Rx, 1 for backup / share |
Interface | 2 female BNC |
Impedance | 750ohms |
Re-clocking | Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for
unrecognized rates |
Nominal level | 0.8 Vp-p |
Minimum/maximum levels | 0.5 V to 1.0 Vp-p |
Return loss | <-25 dB @ 100 MHz |
Data | |
Data Channel | 1ch RS485/422/232 |
Electrical. Environmental. Mechanical | |
Voltage | DC5V1A |
Operating Temperature | -35℃～＋75℃ |
Storage Temperature | -40℃～85℃ |
Humidity | 5～95% non-condensing |
Dimension | 117 mm L x 80 mm W x 22 mm |
Weight | 0.5KG |
