Active Member
|
[China]
Address: NO.80,FEITIAN AVENUE,INDUSTRIAL CLUSTER LUKOU TOWN
Contact name:Suki
Nanjing Token Electronics Science&Technology Co., Ltd. |
|
|
50-200A Hall Effect Current Sensor Transducer For Frequency Converter
Characteristics chart
The TKC-TG3 series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of 3 phase DC, AC or pulsed currents.
| Electrical data(Ta=25℃±5℃,RL=2KΩ,CL=10000PF) |
Type | TKC 50TG3 | TKC 100TG3 | TKC 150TG3 | TKC 200TG3 |
Unit |
Rated current(Ipn) | ±50 | ±100 | ±150 | ±200 | A |
Measuring range(Ip) | ±150 | ±300 | ±450 | ±600 | A |
| Rated output | @Ip=±Ipn ±4±1.5% | V | |||
| Supply voltage | ±15 ±5% | V | |||
Power Consumption | ≤60 | mA | |||
Offset voltage | ≤30 | mV | |||
Magnetic offset | @Ip=±Ipn-0 ≤±30 | mV | |||
Offset drift | @ -40～+85℃ ≤±2.0 | mV/℃ | |||
| output drift | @ -40～+85℃ 0.08 | mV/℃ | |||
Linearity | @Ip=0-±Ipn ≤1 | %FS | |||
Response time | @50A/μS, 10%-90% ≤5 | μS | |||
| Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | |||
Applications
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)Electrochemical
Mechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Directions for use
Is will be in a forward direction when the Ip flows according to the direction of the arrowhead.
The primary conductor should be≤120℃.
The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
Standards
| General date |
| Value | Unit | Symbol | |
| Operating temperature | -40 to +85 | ºC | TA |
| Storage temperature | -40 to+125 | ºC | TS |
| Mass(approx) | 99 | g | M |
Characteristics chart
