Active Member
|
[China]
Address: NO.80,FEITIAN AVENUE,INDUSTRIAL CLUSTER LUKOU TOWN
Contact name:Suki
Nanjing Token Electronics Science&Technology Co., Ltd. |
|
|
Blue AC DC Open Loop Hall Effect Current Sensor For Uninterruptible Power Supplies
TKC-LB series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
Electrical data(Ta=25℃±5℃,RL=2KΩ,CL=10000PF)
Type | TKC50LB | TKC75LB | TKC100LB | TKC150LB | TKC200LB | TKC300LB |
Unit |
| Rated input (Ipn) | ±50 | ±75 | ±100 | ±150 | ±200 | ±300 | A |
Measure range(Ip) | ±150 | ±150 | ±200 | ±300 | ±400 | ±450 | A |
| Rated output | @Ip=Ipn ±4±1% | V | |||||
| Supply voltage | ±15 ±5% | V | |||||
Power Consumption | +18,-10 | mA | |||||
| Offset voltage | ±30 | ±25 | mV | ||||
Magnetic offset voltage | ≤±25 | ≤±20 | mV | ||||
| Offset voltage drift | ≤±1.5 | ≤±1.0 | mV/℃ | ||||
| output drift | ≤±1.5 | ≤±1.0 | mV/℃ | ||||
| Linearity | @Ip=0-±Ipn ≤1 | %FS | |||||
Bandwidth | @ -3db DC…50 | KHz | |||||
di/dt | 50 | A/uS | |||||
| Response time | @50A/μS, 10%-90% ≤3 | μS | |||||
Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | |||||
Applications
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
Mechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Directions for use
It will be in a forward direction when the Ip flows according to the direction of the arrowhead.
The primary conductor should be≤120℃.
The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
When the current will be measured goes through a sensor, the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
Customs can adjust Output amplitude of the sensor by needs.
Custom design in the different rated input current and the output voltage are available.
Standards
General date
| Value | Unit | Symbol | |
| Operating temperature | -40 to +85 | ºC | TA |
| Storage temperature | -40～+125 | ºC | TS |
| Mass(approx) | 23 | g | M |
Characteristics chart
Pulse current signal response characteristic Effects of impulse noise
