Active Member
|
[China]
Address: No.5 LiCun South, Dashi Town, Panyu Dist., GZ, Guangdong,China
Contact name:Michael Chou
Maystar Electronics and Electrical Industry Co., Ltd. |
|
|
12KW Non Woven Face Mask Making Machine , Surgical Mask Making Machine
Dust Mask Making Machine Features
1. High stability, low failure rate, beautiful appearance without
rust;
2. Computer PLC programming control, servo drive, high degree of
automation;
3. Photoelectric detection of raw materials to avoid mistakes and
reduce waste
Brief introduction
This production line makes dust masks for home or high pollution industry application. The body of the masks can be made from multi-layer PP Spunbond and filters. The production process is with overall automation from nose clip welding, logo printing, spinge bar pasting.
No. | Item | Parameters |
1 | Capacity | 35-50pcs/min, 2100-3000pcs/h |
2 | Equipment size | 9670mm (L) × 1500mm (W) × 2150mm (H) |
3 | Appearance color | Grey-white paint or stainless steel, according to this standard without special instructions |
4 | Equipment weight | ≤3000kg, ground load> 300KG/M² |
5 | Working power | 220VAC ± 5%, 50z, rated power about 6.5-8.5kW. |
6 | Compressed air | 0.4-0.6MP (no water, no oil, filtered, clean air after voltage stabilization) Use flow rate of about 300L/min |
7 | Rate of qualified products | >96% |
8 | Equipment failure rate | <2% (The cause of the device itself) |
9 | Main Configuration | Cylinder: AirTAC or equivalent Screw guide: HIWIN / TBI PLC: Mitsubishi |
10 | Operating environment | temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanness no less than 100,000). |
