Henan Tytion Machinery Co., Ltd. |
|
Environmental compact structure High Pressure Grout Pump high speed
High Pressure Grout Pump
Installation of High Pressure Grout Pump:
1 For fixed installation, please use the anchor bolt installation
holes at the bottom of the base. Use reliable anchor bolt
installation holes, which are conducive to the stable operation of
the unit. The size of the installation holes should refer to the
actual base.
2 For use in the field, it must be placed on a solid and stable
ground without the use of anchor bolts, and it can also run safely
and smoothly. If the position is unstable, excessive vibration will
lead to loose parts of the adjusting motor controller, resulting in
damage.
3 Check the power supply to meet the requirements of the speed
regulating motor.
4 The suction section of the pipeline should not leak, generally
should use the check valve.
5 The suction end and the discharge end shall not be connected with
hard pipe at the same time. If necessary, only one end shall be
connected with hard pipe.
Parameters of High Pressure Grout Pump:
Type | TY55K | TY90k |
Motor power | 55kw | 90kw |
Type of motor | YE2VP280M-6 | YE2VP280M-4 |
Function form | Horizontal reciprocating single acting plunger | Horizontal reciprocating single acting plunger |
Plunger quantity | 3 | 3 |
Plunger diameter | 50mm | 50 mm |
Working stroke | 100 mm | 100 mm |
Input speed | 390~900 R/min | 590~1330 R/min |
Discharge volume | 32~75 L/min | 50~110 L/min |
Working pressure | 40-48 Mpa | 33 Mpa |
Suction pipe diameter | 64 mm | 64 mm |
Discharge pipe diameter | 19 mm | 19 mm |
Pictures of High Pressure Grout Pump: