Industrial Milk Sanitary Vacuum Pump , High Pressure Self Priming Pump

Industrial Milk Sanitary Vacuum Pump , High Pressure Self Priming Pump

Sanitary Vacuum Pump Application

In addition to meeting the requirements for sanitation and soft treatment to products, it also has chemical stability. The GKH sanitary centrifugal pump is widely used for conveying various liquid materials in such fields as dairy, beer, beverage, medicine, biological engineering, fine chemical industry, etc. It can be used to convey ordinary solutions of low and medium viscosity, and solutions containing suspension or corrosive solutions.

The form of the GOBOR sanitary centrifugal pump is single stage, single suction and open-type impeller. The pump shell and impeller are elaborately designed to reduce the resistance and thoroughly eliminate the dead corner of sanitation. Thanks to its unique structure, the flow speed of liquid in the pump is enhanced, so that the integral performance of the pump is improved. It is provided with excellent sanitary performance, so it is easy to be cleaned.

It can meet the requirements for sanitation and soft treatment to products and has the chemical corrosion resistance.

Motor

1. The motor is designed and manufactured according to international standards International Electrotechnical Commission IEC34, IEC72

British Standard BS4999-5000

Australian Standard ASI 359-2

German Standard DIN 42673

Conforming to"CE"mark requirements

2. The motor conforms to the following standards GB 755-87

GB10069-88

Q/JBQS 28-20003. Excellent electric performance Low noise, low vibration Protection grade of high performance The standard protection grade of the motor is designed as lp54, IP55

According to user requirements, higher protection grade can be offered.

Suitable for use with double frequency and wide voltage.

Fluid knowledge

In sanitary technological system, the pump is running continuously and providing flowing power for liquid. This challenges the performances of the pump. To reduce risk, the pump shall be elaborately designed so as to solve complex problems.

This is the reason why GOBOR Company is doing its best to make the performances match the intended usage.

GOBOR Company is one of the few professional manufacturers in China that provide centrifugal pumps, sanitary pumps, self-priming pumps, circulating pumps, dairy pumps, food pumps, milk pumps, plate type heat exchangers and etc. But more importantly, we are the professional manufacturer in pump industry, and we have richprofessional knowledge, including pump engineering technologies, pump sealing technologies and pump innovative technologies.

Our product combination ensures the highest sanitary standard, the requirements for no-fault operation and low maintenance.

Standard design

The GKH sanitary centrifugal pump is composed of motor, pump shaft, mechanical clamping jacket, sanitary mechanical seal, connection support, rear plate cover, impeller, pump shell, etc. The GKH sanitary centrifugal pump has large internal round chamfer and cleaning type seal. The GKH sanitary centrifugal pump speciallydesigned for CIP has the stainless steel protection cover used for protecting the motor, and the equipment is supported by four adjustable feet.

Shaft seal

The GKH sanitary centrifugal pump is provided with a set of externally mounted single end mechanical seal or water injection mechanical seal. The static ring of the mechanical seal is made ofstainless seal, silicon carbide or tungsten alloy. The dynamic ring is made of stainless seal, carbon, graphite or tungsten alloy. The seal ring of the water injection type seal is a durable lip seal. The series of pump products can also be equipped with the double end mechanical seal.

Sanitary Vacuum Pump Technical parameters

Maximum inlet pressure:0.5MPa Temperature range:-10℃+140℃(EPDM)

Noise level(at 1m):60-85dB(A)

Washable seal Hydraulic pressure: maximum 0.1MPa Water volume:0.25-0.5L/min Double end seal Hydraulic pressuremaximum 0.1MPa Water volume:0.25-0.5L/min

Medium:20℃ clean water

Rotating Speed:2900RPM

Impeller diameter:

Maximumφ212mm

Emor:±5%

Frequency:50Hz

Inlet Diameter: D1φ89mm

Outlet Diameter:D2φ76mm

Materials

Materials of liquid passing parts:AISI316L or AISI304 stainless steel Materials of other parts:AISI304 stainless steel Outer surface:titanium Inner surface:miror polishing 9.4 or titanium Liquid passing rubber seal materialEPDM FRMNBR