Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
1. Safety Requirement
- All cable or harness connectors in the speedometer circuit shall be
wired and sealed. All connections shall be soldered and insulated
with a flame proof insulation tape of adequate length of such a
color as to blend well with the rest of the vehicle wiring.
- The speed limiter function or the Speed limiter device shall
operate satisfactorily in its electromagnetic environment without
unacceptable electromagnetic disturbance for any other device in
the environment.
- The speed limiter device shall pre-warn the driver, by way of a
high frequency buzzer, optionally flashing light signal can be used
that the set speed is being reached.This warming shall occur at 5%
prior to the set speed and shall continue buzzing once the set
speed is achieved/ exceeded.
- When the set speed is reached, the speed limiter device shall
temporarily cause the engine to lose power.Engine power shall be
reinstated at a speed not less than the pre-warning switch
point,which is 5% below the set speed.
2 Product Specifications
| Color | Black | Application | free android and IOS app |
| Input Fuse | 5A | CPU | TI:MSP430F5419(100MHz) |
| Battery | Lithium battery :400mA( working time is about 3.5 hours) | Warranty | 2 years |
| Item Name | Top selling shine | Function | camera gps fleet tracker |
| Working Temperature | Anna Shi | MOQ | 5 Pieces |
| Performance Tests | - Visual Examination. The speed limiter shall be visually examined
for workmanship, finish, marking and general requirements mentioned
in clause 4 pertaining to the components alone
- Functional Test and Power Consumption, The speed limiter shall be
connected to the rated voltage. The speed limiter device shall be
coupled to a suitable test rig and tested for its function viz.
limiting the speed at the set value. The maximum current
consumption is noted. The maximum
current of each type of speed limiter device shall not exceed the
values specified by the manufacturer. - Operating Voltage Range.
| GPS Module | GPS chip set: SiRF Star III
Frequency: L1, 1575.42 MHz
Number of Channel: 20
Reacquisition: 0.1 sec, average
Hot boot: 2 sec., average
Warm boot: 38 sec., average
Cold boot: 44 sec., average
Altitude limit: 18000 m
Velocity limit: 515 m/s |
| TESTS | Five samples of speed limiter device shall be provided - four
samples for the
performance and endurance test described in clause 8.3 and 8.4 and one sample as fitted on the vehicle for carrying out.the
tests prescribed in clause 8.5. In the case of add-on or
on-board system built in the vehicle, the involved system and its
components should be provided separately for the performance
and endurance tests | Input I/O | 8 I/O input/output Port
1 main power check
1 port use to check the engine ( ACC check)
1 port use to SOS
1 analog Input port( Fuel sensor)
1 Output port ( Car engine control )
3 Extend ports ( Input/Output control by software) |
3. Speed Limiter Requirements
Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
- The speed limiter function or road speed limiter shall be
EMCcompatible or shall have Anti-Jammer mechanism;
- The speed limiter device system shall be equipped with a system
which shall accept an external device for testing the speed limiter
and verifying its functionality;
- The speed limiter device system shall be able to be verified.
Authenticated and tested whilst the vehicle is "on" the road;
- The input speed signal shall be obtained from global navigating
system (GNS) or speedometer vehicle speed signal or a converted
speed signal from vehicle gearbox or from other separately
installed sensor as deemed appropriate, mechanical actuator system,
linkages etc. or any unauthorized modification and adjustment
to the system;
- The speed limiter devices shall be of industrial grade and designed
for automotive application;
- The road speed limiting device shall be designed and constructed in
such a way that it can be fitted in a place not easily accessible
Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
- No malfunction or unauthorized interference shall result in an
increase in engine power above the demanded by the position of the
driver's accelerator. The malfunction of the speed limiter devices
shall not affect the normal vehicular performance ;
- The speed limiter function shall be independent of the condition or
soundness of the speedometer ;
- Speed limiter devices shall be so constructed that the vehicle may
not be accelerated by the operation of the acceleration devices,
such as the accelerator pedal, when the vehicle is running at its
set speed;
- The input speed signal shall be obtained from global navigating
system (GNS) or speedometer vehicle speed signal or a
converted speed signal from vehicle gearbox or from other
separately installed sensor as deemed appropriate.
- The speed limiting function shall not cause engine back firing,
- For the purpose of anti-tampering of the setting of the "set speed"
of a speed limiter device, the connection points on a speed limiter
device for adjustment of "set speed" shall be properly sealed and
protected from unauthorized adjustment
4. Technical Parameters:
Electronic Vehicle Speed limiter with GPS Tracking System,APP,Fuel
Monitoring
| Item | Parameters |
| Overall Size | 20.0 X 9.2 X 4.5 CM |
| Host Net Weight | 0.4 KG |
| Processing chip | STC |
| Speed Limiting Zone | 20-200 Km/H |
| Speed Limiting Deviation | ±5Km/H |
| Mechanical Bearing Capacity | 400N |
| Working Voltage | 9-36 V |
| Rated Power Consumption | <0.3 W |
| Working Current | <60 mA |
5 Application Field:
- For large vehicle management and dispatching system ;
- For tour bus and passenger car management ;
- For logistics vehicle monitoring and management ;
- For tank truck monitoring and management.
- For Dangerous goods transportation
