Active Member
|
[China]
Address: No.501, Hongye Bldg., Pioneering Park, Xiamen Torch Hi-tech Industrial Zone, Xiamen,361009, China.
Contact name:Leo.Liu
Xiamen Hongcheng Insulating Material Co., Ltd. |
|
|
High strength of laminated sheet GPO-3(UPGM203) with certificate of ROHS/REACH/UL
GPO-3 laminate sheet also known as UPGM 203, NEMA standard on North America , it is known as GPO-3 ; IEC Standard on Europe , it is known as UPGM203 , they are the same material . It is alkali-free fiberglass mat dipped into unsaturated polyester resin adding relevant chemical agent as the basic material pressed under high temperature molded into rigid panel as insulating material. So , it is composited on glass fiber mat and polyester resin , It has good electrical property under high humidity and high mechanical property under medium temperature, fine fire retardant property, good arc resistance and tracking resistance.
This material has been exporting to more than 30 countries all over the world , it covered new energy , rail traffic , power transmission and transformation .
Feature of GPO-3
High arc resistance and leakage resistance , flame retardant , it meets requirement for UL94-V0
High temperature resistance , can work continuosly at 155℃ on every electrical equipment .
Waterproof , it has propertiy on very low water absorption
Good electrical performance under high humidity due to low water absorption
It is green products with very little bit effect on environment , nontoxicity for human .
It is halogen-free material
| Hong Cheng Grade | HC-GPO3 | |||
| IEC 893 / EN 60893 Grade | UP GM 203 | |||
| DIN 7735 Grade | HM 2471 | |||
| ANSI (NEMA) Grade NEMA LI-1 | GPO-3 | |||
| Items | Test Method | Unit | Typical Values | |
| Physical Properties | Color | Visual inspection | ---- | Red/White/Brown/Grey |
| Specific Gravity | IEC 60893-2:2003 | g/cm3 | 1.95-2.05 | |
| Water absorption | ISO62:2008 | % | ≤0.5 | |
| Mechanical properties | Tensile Strength | IEC 60893-2:2003 | Mpa | ≥130 |
| Compressive strength | IEC 60893-2:2003 | ≥300 | ||
| Flexural Strength | IEC 60893-2:2003 | ≥180 | ||
| Impact strength | IEC 60893-2:2003 | KJ/m2 | ≥60 | |
| Electrical properties | Volume Resistivity | IEC 60093:1980 | Ω·m | ≥ 1.0 x 1010 |
| Surface Resistivity | IEC 60093:1980 | Ω | ≥ 1.0 x 1012 | |
| Electric Strength ┴ | IEC 60893-2:2003 | kV/mm | ≥ 12 | |
| Breakdown Voltage // | IEC 60893-2:2003 | kV/25mm | ≥ 80 | |
| Arc Resistance | IEC 61621:1997 | sec | ≥180 | |
| PTI Proof Tracking Index PTI | IEC 60893-2:2003 | --- | ≥600 | |
| Dielectric Constant | IEC 60893-2:2003 | --- | 4.0-5.0 | |
| tgδ Dissipation Factor | IEC 60893-2:2003 | --- | ≤0.03 | |
| Thermal properties | Coefficient of Thermal Expansion | ASTME 228-11 | 1/K | ≤2x10-5 |
| Temperature Index | IEC 60085:2004 | ℃ | 155 | |
| Flame Resistance performance | Oxygen Index | ISO 4589-2:1996 | %O2 | ≥ 30 |
| Flame Resistance | IEC 60893-2:2003 | --- | V-0 | |
| Toxicant(Emission halogen etc.) | E662 | --- | Low | |
| Other properties | The anti microbial properties of bacteria | G21-G22 | --- | good |
Application
It's widely used in the low voltage electrical industries such as making of phase and end barriers, insulating supports, bus bar supports and mounting panels in switch-gear and other types of electrical apparatus.
GPO-3 laminate sheet performs well in electrical applications that require high arc and carbon track resistance as well as flame resistance, physical strength, and moderate heat resistance. Grade GPO-3 laminate is used extensively in the making of phase and end barriers, insulating supports, bus bar supports and mounting panels in switch gear and other types of electrical apparatus.
