|
[China]
Trade Verify
Address: No.5616th, Caoan Road, Jiading District, Shanghai
Contact name:Clarke Wang
Shanghai Glomro Industrial Co., Ltd. |
|
Verified Suppliers
|
|
|
Germany KNF original PJ30080-N86-2.01 Sampling pump VOC Vacuum pump CEMS flue gas analysis Pump
Adapt to the environment:
This product is used in industrial process gas continuous analysis
system (extraction measurement), for gas extraction, internal
anti-corrosion treatment, especially suitable for flue gas
analysis. Extraction of gases such as SO2, NOX, CO2, CO, N2, O2, or
a mixer can be performed.
Technical Parameters:
(1) Model: PJ30080-N86-2.01
(2) Air pumping capacity: 6 L/min
(3) Power supply: 220-230VAC 50HZ
(4) Interface: 1/8'' internal thread
(5) Piping: Φ6 PTFE tube
(6) Working pressure: Pmax: 0.5 Bar
(7) Power: 60W
(8) Weight: 1.1 Kg
Installation method:
This product is panel mounted, the mounting hole spacing is: 48mm,
48mm. The mounting hole size is: 4-Φ5.
Daily maintenance:
This product is an oil-free diaphragm vacuum pump, no need to
refuel. If the inside is clogged or contaminated, open the top four
screws, clean the gasket, and clean the pump membrane. If there is
serious pollution, resulting in air leakage or insufficient air
supply during the sampling process, the pump membrane should be
replaced in time.
