870mm Height Glass Washing Machine 2500mm for Smooth and Professional Glass Processing

1,Use of machine

The machine according to the different purposes of the user, with rolling brush type, automatic lifting thickness adjustment and a number of functional combination collocation. The machine main transmission system adopts gear transmission, cleaning system with electric adjustment, stable transmission, easy to operate. This machine has the features of stable and reliable, good cleaning effect, easy maintenance and adjustment.. Application of tempered glass washing, LOW-E glass and other washing process.

1, Feeding area adopted with more than 10bar high-pressure pre-wash .
2, Drive Speed Controlled by adjustable frequency,glass thickness adjustable by electricity device. 3, Four Step Water tanks,with water supply switch of parallel connection, water heating device
And fresh water auto supply device.
4, Multistage high-performance air Blade,Stainless Steel&Aluminum Combination Structure,Three Parts Flowing Design.
5, Electricity device adjust glass thickness,and the max adjusting height of inner maintain space can be 350mm.
6, Four Pairs of Up&Down Brushes and Low-E brush design can meet the high-standard washing clean requirement.

2,Equipment Features
STUCTURE
1 section of the structure, from the feeding section, washing air dry section, the material section. Total length 6.3 meters
2, the main part of the force with large 120mm*120mm*5.5mm tube, stable structure, reliable.
3 level three water tank, clean degree is high, water consumption is little.
4, processing parts are made of surface blackening or copper rust, rust,

BRUSH

1, diameter 150 brush three sets of six, with a soft brush to wash LOW-E glass, bristle diameter 0.37mm, soft 0.1mm.
2, the large diameter of the brush shaft is 35mm, ensure that the brush speed of 350 revolutions per minute, do not shake, no broken shaft problem, hit the glass.
3, the replacement is convenient, hard hair cylinder lift, conversion wash LOW_E glass operation is quick, simple.

LIFT CONTROL

1, the dry cleaning section of integral lifting, the internal height can reach 350mm, maintenance convenient replacement brush
2, the use of electric and digital display, processing different thickness of the glass online can be adjusted, the thickness of digital visual display.
3, waterproof and anti - rust and anti - rust - proof dust - handling, durable.
 

DRIVE

1, the transmission of helical teeth, compared to the chain easy broken, the umbrella tooth easy to wear, prone to the glass into the cleaning section, and the glass collision fragile issue, the transmission more stable synchronization, less noise;
2, drive shaft for plating Luo rod, smooth surface, no rust, warranty replacement tooth is convenient and simple. Do not appear after the rust do not play out.
3, the transmission of helical teeth, the annealing process, the tooth part of high frequency processing. High hardness, wear and less, do not jump tooth;
4, the im display.port of Taiwan delta < > inverter speed, simple and convenient, the speed of digital display.
5, cots glue injection, cleaning air dry section of synchronous roller power device, more than 10mm glass cleaning on the transmission roller power is stable synchronous stable. Comparison of yin and yang plastic tooth under the drive of the disadvantages (thick piece of glass on the table without power does not rotate, have demand for Low-E glass surface without scratches.
 

STAINLESS STEEL

1, all stainless steel sheet, thickness 1.2mm, rust better, more beautiful appearance;
2, the cleaning section of waterproof ring, waterproof board and so on to ensure that no leakage problem; at the same time, the use of casting bearings, waterproof performance is better, accessories better use, long use of time;
 

HIGH PRESSURE FAN

1, the high pressure 15KW air blower, the wind pressure 3-4 MPa, the wind speed 10-12 meter every second, the air dry effect is very good. The wind temperature is 35 minutes after the starting 45 minutes, the speed reaches 9 meters per minute
2, stainless steel wind knife, do not rust, deformation, will not appear long time outlet deformation is not dry.
3, the fan is completely sealed and noise processing, compared to only part of the wind case, the noise effect is better, the noise is low, and the wind temperature is higher 5-10 degrees.
4, air dry next paragraph also use the full seal suction speakers, the wind noise is even more small.

3 TECHNICl PARAMETEES

Max glass size :	2500mm
Min glass size:	400mm×400mm
Processing :	3mm-19mm
Working speed:	0-10m/min
Height :	870mm±30mm
Total power:	23Kw
Power:	3PH/AC380V/50Hz
Dimension :	6300*3600*2650mm
Air pressure:	0.5-0.8MPa/1500 Lpm

4,Product accessories:

Accessory name	Technical parameters			Accessory name		Technical parameters
Drive motor	(1.5KW) SIEMENS			Brush motor		(1.1KW*2)SIEMENS
Control appliance				Transmission frequency conversion		Taiwan Delta (1.5KW)
Water pump	L	X	(0.75KW*3)	High fan	pressure	Foshan Chan Tong (18.5KW)
Sheet metal	1.5mmStainless steel, thickness 1.5mm			Height encoder		TOKY
Rubber roller	¢80mm			A stiff brush		0.35Of the 150* axis 35, hair diameter 0.37mm
Soft brush	1700*400mm			brush		0.1Of the 150* diameter 0.1mm	axis	35,	hair

Sea worthy packing

Company Profile:
Founded in 2010, Foshan Star Glass Machinery Co., Ltd. is a high-tech enterprise specializing in the 
production, research and development and sales of glass deep processing machinery. The company is 
located in Foshan City, a major glass machinery center.
The company is committed to the production of glass radiant tempering furnace, convection tempering 
furnace, flat bending dual-purpose tempering furnace, automotive glass bending furnace, nonautoclave
PVB laminating production line.
After years of hard work and exploration, the company has obtained a number of national patents, and 
its technology is ahead of the domestic level. The products sell well all over China and are exported to 
Australia, the United States, the Middle East, India, Vietnam, South America and other places.
Companies adhering to the principle of quality first, service-oriented, and constantly improve the 
company's level and product quality, and strive to create a skilled, high-quality team. We will sincerely 
cooperate with new and old customers at home and abroad with sincerity and jointly develop the 
bright road of glass machinery manufacturing industry.

cooperation partner

1. who are we?
We are based in Guangdong, China, start from 2011,sell to South America(30.00%),Southeast Asia(20.00%),Mid East(15.00%),Eastern Europe(10.00%),Africa(10.00%),North America(10.00%),Western Europe(3.00%),Eastern Asia(2.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Glass Machine,Glass Furnace,Glass Bending Furnace,Glass Bending And Tempering Furnace,Glass Machines

4. why should you buy from us not from other suppliers?
Our company has a professional R & D team and a strict quality management system. 10 years of export experience. Mature after-sales installation team.

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Arabic,French,Russian