|
[China]
Trade Verify
Address: 4FL, B3 Saturn Builing, No. 98 Star Road, New North Zone, Chongqing, China
Contact name:Maggie YU
JEFFER Engineering and Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Melting Capacity 50TPD, End Fired Furnace, For Glass Production Line
1. Brief Description
The end fired furnace is named by the longitudinal arrangement of the burner port and the U shape of flame combustion route. At present, the end fired furnace is more widely used in the glass industry.
The melting process is divided into five stages as following, each section has its inner connection, affecting each other. If one stage has imperfect performance, it will influence the next stage, and ultimately affect the quality of glass.
Glass melting is the most important process in glass production, it is a forming process where the batched materials form a qualified liquid evenly with no bubbles under high temperature heating.
Glass melting is a very complex process, it includes physical,
chemical and physicochemical phenomena and reaction. These
phenomena and reaction lead the mechanical mixed raw materials to
complex melting glass liquid.
2. Advantage
| 1 | Long Flame |
| 2 | High efficiency of heat utilization |
| 3 | Low energy consumption |
| 4 | Lower investment |
| 5 | Smal foot print |
3. Factors that influence the melting effects
| 1 | Characteristic of raw materials |
| 2 | Chemical compon |
| 3 | Material feeding method |
| 4 | Melting temperature |
4. Main sections of furnace
Normally, the semidiameter of working tank is equal to the width of the melting tank, the depth of the working tank is less than 300mm-400mm of the melting tank.
5. FAQ
Q: Who we are?
A: JEFFER Engineering and Technology Co., Ltd is a professional engineering company specialising in project design, engineering technology consulting, engineering, procurement, construction (EPC), and project operation management.
Q:Can you offer design service?
A: Yes, we could design full solution drawings as per your requirements.
Q: Do you offer installation on site overseas?
A:Yes, we can provide our engineer to supervise the installation work on site or provide the the whole installation team on site to finish the project.
