SS210 SS310 SS410 4x8 Stainless Steel Panels 0.3-3.0mm

4x8 Grade 409 410 430 Customize cold rolled Stainless Steel Decorative Sheet Metal

Stainless Steel Sheet & Plate Introduction

410 stainless steel is known as one of the most commonly used martensitic steels. It contains over 11.5% chromium, making it moderately resistant to corrosion. Martensite 410 can be hardened by heat treatment and has a wide range of properties. Whether annealed or hardened, 410 stainless steel retains its magnetic properties. Due to its hardenability, its weldability may be reduced accordingly. Its application is also limited by the working temperature, the strength decreases when the working temperature is high, and the ductility decreases when the working temperature is low. Grade 410 is suitable for applications requiring high strength but moderate corrosion and heat resistance.

410 stainless steel has good tensile strength, creep strength and fatigue strength, but has slight corrosion resistance. After annealing, it can be moderately stretched and formed with fairly good cold workability. Heat treatments for Grade 410 include annealing, hardening, quenching, tempering and stress relieving. As a martensitic steel, Type 410 is one of the most difficult stainless steels to weld. The chemical balance gives stainless steel 410 higher strength and hardness, but less ductility.

Stainless Steel Sheet Parameter

Stainless Steel Sheet

• Usually less than 6mm thick
• Thinner than SS plate
• Lightweight residential and architectural applications

Stainless Steel Plate

• Usually thicker than 6mm
• High tensile strength
• Good durability
• Heavy-duty applications

410 Stainless Steel Sheet & Plate

410 stainless steel is a stainless steel grade produced according to the American ASTM standard, which is equivalent to my country's 1Cr13 stainless steel, S41000 (American AISI, ASTM). 0.15% carbon content, 13% chromium content, 410 stainless steel: good corrosion resistance, machinability, general purpose blades, valves. 410 stainless steel heat treatment: solution treatment (℃) 800-900 slow cooling or 750 fast cooling. 410 stainless steel chemical composition: C≤0.15, Si≤1.00, Mn≤1.00, P≤0.035, S≤0.030, Cr=11.50~13.50.

410 Stainless Steel Sheet & Plate Features

1) High strength;
2) Excellent machinability
3) Hardening occurs after heat treatment;
4) Magnetic;
5) Not suitable for harsh corrosive environment.
3. Scope of application
 

Blades in general, mechanical parts, cutlery class 1 (spoons, forks, knives, etc.).

Stainless Steel Sheets Applications

1) Steam turbine
2) Jet engine
3) Gas turbine
4) Steam valve
5) Tray valve
6) Pump shaft
7) Turbine blades
8) Bolts
9) Flat spring
10) Knife
11) Kitchen Utensils
12) Hand tools
13) Miscellaneous
Applicable standards: ASTM A276, ASTM A240, ASTM A580, ASTM A479, ASTM A959, ASTM A473, ASTM A314, SAE J405, etc.