Plastic Welder for HDPE Geomembrane Fish Pond Liner HDPE Hot Wedge Welding Machine Made

Company introduction

Tai'an Tenglu Engineering Materials Co., Ltd. is located at the foot of Mount Tai---Taian, Shandong. The company has always adhered to the enterprise spirit of "honesty, credit first". specializing in the production of geomembrane, geotextile, geogrids, geocells, geonet, cement blanket, geosynthetic clay liner, 3D composite drainage geonet, plastic drainage board, permeable pipe and other series of geosynthetic materials. The products are widely used in the foundation reinforcement of highways, railways, airports, municipal engineering, antiseepage of construction

Tai'an Tenglu Engineering Materials Co., Ltd. is located at the foot of Mount Tai---Taian, Shandong. The company has always adhered to the enterprise spirit of "honesty, credit first". specializing in the production of geomembrane, geotextile, geogrids, geocells, geonet, cement blanket, geosynthetic clay liner, 3D composite drainage geonet, plastic drainage board, permeable pipe and other series of geosynthetic materials. The products are widely used in the foundation reinforcement of highways, railways, airports, municipal engineering, antiseepage of construction

projects, landscaping, landfills, sewage treatment, solid waste disposal, waterproof engineering, etc.We follow the Confucian style and corporate morality in our operations, and have won a good social reputation. In production, we insist on taking science and technology as the guide and management as the guarantee, so that the product quality is Topping the list in the same industry. The company has successfully passed the IsO9001 quality management system certification, and related products have been identified by China Railway, China Construction, China Communications, China Metallurgical, China Hydropower and other departments, and have obtained long-term cooperative relations with relevant units. Some products have been tested by the Swiss General Notary Public (SGS) and obtained the test report.

1.Heating system High power alloy heat wedge and unique heating design, high heating efficiency, good welding performance, long service life.

Because the welding quality of the machine has a direct relationship with the speed and temperature setting of the work, in order to achieve high quality welding results, it must be operated by a special person.

1, the user must choose not less than 10A three-core power cord and three-socket,(operation corresponding welding machine plug L connected to the live line,N connected to the neutral line,L connected to the ground protection line) confirm that the outside line is connected, press down the press rod handle of the machine, so that the press wheel is separated, plug in the power plug.

2, turn on the power switch, select a certain temperature and speed, take a few presses to test welding, because of the ambient temperature, the thickness of the material is not the same, the welding selection temperature of the same material is different, in the case of the speed (about 2m/min) unchanged, the selection temperature from low to high temperature (about 250° C-350 °C) slowly adjusted to determine the best welding effect.

3, the judgment of welding temperature, the transparent PE material, can be directly observed, the solder mark is flat and transparent glass, the surface speed and temperature are suitable, the solder mark is seriously broken, indicating that the temperature is too high or the speed is slow, such as the solder mark is opaque and white, indicating that the temperature is low or the speed is fast, for the opaque material, observe whether there are obvious welding marks. It can also be used for tensile testing after all cooling

4. Trim the edge of the material to be welded straight, face forward, overlap the left bottom and right top.

5, after determining the temperature and speed, the material to be welded is inserted between the two presses, so that the fuselage is parallel to the edge of the mother village, and the press rod handle can be welded by itself, under normal circumstances, the operator only needs to observe whether the welding mark is deviated from the edge of the base material, and correct it in a small range in time.

6, when the material is welded to the end, the press rod handle is pressed down in time, so that the upper and lower press wheels are in a separate state. Lest the time is too long, burn the rubber wheel.

7, due to the reason of thermal inertia, if the temperature is too high or too low during the welding process, the speed can be adjusted in a small range to make up for the temperature deviation.

1. The product quality is guaranteed, the production line is perfect, and there are strict sampling procedures.

2. Provide free samples.

3. Moq 1000.

4. Welcome to customize orders.

5. Delivery time is generally 7-15 days, large orders can be negotiated.

6. Payment ways are Online Bank Payment, T/T,L/C,D/P D/A,PayPal,Western Union.