Active Member
|
[China]
Address: 301-64 Hexin Road, High-Tech District, Chengdu 610000, China
Contact name:Cai Qiang
Jigren Systems Co.,Ltd |
|
|
11.6L Powerpack for Natural Gas, Biogas and Syngas Engine
Descriptions
1. High power density
2. Base engine technology comes from Steyr, which is mature and has high thermal efficiency
3. Seperated type cylinder head design, easy for maintenance
4. Specific improvements on gas fuel, making the engine reliable , durable and economical
5. Advanced electronic control fuel system of continuous flow,super durable design, especially resistant on
dry and dirty gas
6. Self adaptive and self-learning abilities on gas composition
7. Closed-loop control on fuel
8. Electronic speed governing
9. Support CAN J1939 communication
10. SAE flywheel housing and flywheel
11. With after-treatment, it can meet emission standard Europe V/Tier4/CPCB2
| No. | Items | Technical Parameters |
| 1 | Engine Model | T26556 |
| 2 | Bore×Stroke | 126×155 mm |
| 3 | Gas Cylinder NO. | 6 |
| 4 | Displacement | 11.596 L |
| 5 | Compression Ratio | 11.5:1 |
| 6 | Gas intake Pressure | 3～15/450～700 kPa |
| 7 | Cooling Method | Water Cooling |
| 8 | Aspiration Method | Turbocharged Intercooler |
| 9 | Standard Gas Intake Temp. | 25°C |
| 10 | Low Idle | 800 r/min |
| 11 | Direction of Rotation | Counter-clockwise viewed on flywheel |
| 13 | Efficiency | 38% |
| 14 | Dimensions | 1479×828×1133 mm |
| 15 | Net Weight | 950 Kg |
| 1500rpm | |||
| Fuel | kWm | HP | kWe for COP |
| Natural Gas | 275 | 373 | 150 |
| Biogas | 200 | 271 | 150 |
| Syngas | 75 | 102 | 60 |
| 1800rpm | |||
| Fuel | kWm | HP | kWe for COP |
| Natural Gas | 275 | 373 | 150 |
| Biogas | 210 | 285 | 150 |
| Syngas | 80 | 108 | 64 |
| Vehicle | |||
| Fuel | kW/rpm | HP/rpm | N.m/rpm |
| CNG/LNG | 309/2000 | 420/2000 | 1650/1200～1500 |
| Power values are in accordance with standard ISO 3046-1.kWm values are based on a calorific fuel value for 10kWh/Nm³ for natural gas and 6kWh/Nm³ for biogas and 30kWh/Nm³ for LPG and 4kWh/Nm³ for syngas . kWe values are based on standard assumptions for mechanical and electrical losses. these values are provided for information purposes only and are non-binding.Ratings and performance are solely for reference only and subject to site conditions and JIGREN application and ratings guidelines. The product images shown are for illustration purposes only and may not be an exact representation of the final product. All information is subject to change without notice. | |||
