|
[China]
Trade Verify
Address: No.255 Rd.WanXing.Avenue Longhu.Industrial East Zone, Xindu,Chengdu,Sichuan,China
Contact name:Emma
Chengdu Sevenpower Generating Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
60HZ 220KW 280KVA 3 Phase Natural Gas CHP Natural Gas Cogeneration
Natural Gas Generator Set With Heat Recovery System
Production
- Keep customers posted on the progress of production.
- Systematical and strict testing before delivering to customers
- Testing
| STORAGE TIME | RECOMMENDED SERVICE PROCEDURE TO PREVENT HARD STARTING |
| Less than 1 month | Drain all CHP water. |
| More than 1 month | Change engine oil.
Remove the spark plug, and pour about a tablespoon of clean engine oil into the cylinder. Crank the engine several revolutions to distribute the oil, then reinstall the spark plug.
Slowly pull the starter grip until resistance is felt. At this point, the piston is coming up on its compression stroke and both the intake and exhaust valves are closed. Storing the engine in this position will help to protect it from internal corrosion. |
CHP Main Specifications
| Item | Model | SP220N | |
| fuel | — | Natural Gas | |
| marks | — | Synchro CHP | |
| CHP | electrical output(KWe) | kVA/kWe | Continuous Power |
| 275/220 | |||
| thermal output(KWt) | kWt | 300 | |
| electrical efficiency | % | 34.4% | |
| thermal efficiency | % | 47.6% | |
| overall efficiency | % | 82% | |
| frequency | Hz | 60 | |
| voltage | V | 440/254 | |
| gas inlet pressure | kPa | 3-5 | |
| dimension (soundproof type) | mm*mm*mm | 2900*1600*1800 | |
| net weight | kgs | 3500 | |
| NG consumption | m3/kW.h | 0.295 | |
| standard type-db(A)@7m | — | 59 | |
| Certificate | — | CE | |
| water-water heat exchanger | — | SWEP | |
| water-exhaust heat exchanger | — | made of full stainless steel | |
| ignition system | — | Altronic | |
| speed governor | — | Woodward or Hainzmann | |
| mixer | — | Venturi type | |
| gas filter | — | Madas | |
| zero regulator | — | Kromschroeder | |
| Lambda auto control | — | Available on request | |
| emission standard | — | Available on request | |
| MCB | — | ABB | |
| GCB | — | ABB | |
| Controller | ComAp IC | ||
| Engine | Engine model | — | STYER T12 |
| Engine type | — | 6 cylinders,4stroke,water-coolled | |
| RPM | — | 1800 | |
| Compression Ratio | — | 11.0 | |
| Displacement | — | 11.6L | |
| Oil capacity | — | 36L | |
| Charging voltage | — | 24V(DC) | |
| Charging current | — | 5A(DC) | |
| Starting system | — | Electic-start | |
| Alternator | model | — | Meccalte |
| phase | — | 3 phase 4 wires | |
| insulation system | — | class H | |
| protection | — | IP23 | |
| Cooling Type | — | air cooled |
Why SevenPower?
- Environmentally friendly design
- Long time research and development and testing for high
reliability
- Comprehensive heat insulation to minimize heat losses
- Water-to-water heat exchanger/SWEP, self-developed exhaust heat
exchanger which is made of full stainless steel #316 instead of
universal carbon steel which get rusty easily.
- CHP inner pipeline is made of full stainless steel.
- Maximum lower the noise level
- Maintenance friendly thanks to easy access
- Long service intervals
- Suitable for mains parallelling
- CE approved
For more information about the 220KW CHP, please consult with your
sales representative.Thanks.
Our Packing
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting
