|
[China]
Trade Verify
Address: The 4th floor, No.28, Fozuling Road,East-lake Hi-Tech Development Zone,Wuhan 430000,China
Contact name:Ye
Enviro Solutions Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Portable Syngas Analyzer Multi-gas Analyzer Heating Value biomass gasifications steel making process applications
A portable syngas analyzer is a device that measures the composition of syngas, a mixture of carbon monoxide, hydrogen, and other gases. Syngas is produced by the gasification of biomass, coal, or other carbon-based materials. It is used as a fuel for gas turbines and other power generation equipment.
Portable syngas analyzers are used to monitor the composition of
syngas in real time. This information can be used to optimize the
gasification process and to ensure that the syngas meets the
specifications of the power generation equipment.
Portable syngas analyzers are typically equipped with a variety of
sensors, including a carbon monoxide sensor, a hydrogen sensor, and
an oxygen sensor. The sensors are used to measure the concentration
of each gas in the syngas mixture.
The data from the sensors is displayed on a digital display or sent
to a computer. The data can be used to create graphs and charts
that show the variation in the syngas composition over time.
Portable syngas analyzers are used by a variety of industries,
including the power generation, chemical, and refining industries.
They are also used by research and development laboratories.
Here are some of the benefits of using a portable syngas analyzer:
- They can be used to monitor the composition of syngas in real
time.
- They can be used to optimize the gasification process.
- They can be used to ensure that the syngas meets the
specifications of the power generation equipment.
- They are easy to use and maintain.
- They are affordable.
- They are touch sceen with USB port
O2%+CO%+CO2%+CH4%+CnHm%+H2% All measurement in one unit
Applications
| Components | Method | Range | Resolution | Precision |
| CO2 | NDIR | 0-5% to 100% | 0.01% | ≤2% |
| CO | NDIR | 0-5% to 100% | 0.01% | ≤2% |
| H2 | TCD | 0-5% to 100% | 0.01% | ≤3% |
| O2 | ECD | 0-5% to 25% | 0.01% | ≤3% |
| CH4 | NDIR | 0-5% to 100% | 0.01% | ≤2% |
| CnHm (optional) | NDIR | 0-5% to 10% | 0.01% | ≤2% |
| Note: Measurement range can be customized by the requirement. Max: 6 components at the same time. | ||||
| Response Time (TD+T90) | <10s (NDIR) | |||
| Response Time | 15min | |||
| I/O port | RS232 | |||
| Work temperature | 0～50℃ | |||
| Relative humidity | 5～85% | |||
| Ambient air pressure | 86～108kPa | |||
| Power supply | AC 220±10%V 50Hz±1Hz | |||
| Weight | About 3.5kg | |||
