Active Member
|
[China]
Contact name:Lucky Hu
Changzhou Hongle Machinery Co.,Ltd |
|
Heavy Duty Hot Dipped Galvanized Cage Trailer 7X5 Box Trailer
SPECIAL FEATURES:
These cage is made in Four Pieces; it has tube extensions on each
end
Each Side Panel Slips into the tube holders on the trailer sides.
If you need to fit cage to other trailers just cut to tube
extensions off. Four hole are already drilled in the side frames
Making this cage very Quick to assembly and dismantle. Also taking
up minimum space when stored. THESE CAGES ARE FULLY HOT DIPPED
GALVANIZED
GALVANISED CAGED SINGLE AXLE ROLLED BODY TRAILERS
Front & rear opening checker plate tailgates with tie rails
Mudguards checker plate with deflection rails
Swing handles to secure the tailgates
V- type draw bar made from square RHS tube
Spare wheel holder on draw bar
Lockable 50mm coupling
LED ADR approved lights (Protected) front and sides reflectors
Mudflaps
New wheels
Plug holder welded to the draw bar
Tube holder in each corner for fitting cage
With 800mm High Galvanised Cage
Floating Shackle Springs
Fully Hot Dipped Galvanised
SPECIFICATIONS
| BODY/FLOOR | 350MM Sides, 2 piece 2.4mm Rolled Checker Plate Tub |
| CHASSIS | 50x50x2.5mm SHS |
| DRAW BAR | 70x50x2.5mm RHS V-type, with spare wheel holder (100X50X3 ON 8X5) |
| COUPLING /SAFETY CHAIN | 50mm Lockable Plunger /2 off 8mm Rated chain 450mm Long |
| TAILGATES | 2.4mm Checker Plate, with 14mm tie rails |
| MUDGARD | 2.4mm Checker Plate, 250mm Wide 4-Fold |
| DEFLECTION RAILS | 50x50 Angle on each side |
| SIDE TIE RAILS | Full Length of Trailer (extra reinforced) 27x2mm Round Pipe |
| SUSPENSION/ AXLES | 6 Leaf Floating Shackles Springs/ Solid Axle 39mm Round |
| HUBS/FORD | LM A-type PCD 114.3, 5 x 1/2" Studs (Stud Centre 66.6mm) |
| BEARINGS | Bearing A-type Inner Large LM67048 Outer Small LM11949 |
| RIMS | NEW Sunraysia Type 14x5.5" CB 84mm PCD 114.3 (FORD) |
| TYRES | NEW 185R14C |
| LIGHTS | LED Multi volt 12-24v, Side Clearance Lights 5ft only 7-Pin plug |
| CAGE 800M HIGH | Front & back swing doors removable-60x50x5mm heavy mesh 40x40 frame |
| LIGHTS | LED Multi volt 12-24v, Side Clearance Lights 5ft only 7-Pin plug |
| TRAILER DIMENSIONS | ||||
| 6x4 | 7x4 | 7x5 | 8x5 | |
| SIDE HEIGHT | 350 | 350 | 350 | 350 |
| CAGE HEIGHT | 800 | 800 | 800 | 800 |
| FLOOR HEIGHT | 530 | 530 | 530 | 530 |
| OVERAL HEIGHT | 1680 | 1680 | 1680 | 1680 |
| INSIDE LENGTH | 1820 | 2130 | 2130 | 2440 |
| INSIDE WIDTH | 1210 | 1210 | 1520 | 1520 |
| DRAWBAR LENGTH | 1250 | 1250 | 1320 | 1520 |
| OVERAL LENGTH | 3120 | 3430 | 3500 | 4040 |
| OVERAL WIDTH | 1720 | 1720 | 2030 | 2030 |
| LOAD RATING KG | 750 | 750 | 750 | 750 |
| ATM KG | 318 | 330 | 353 | 384 |
| PAYLOAD KG | 432 | 420 | 397 | 367 |
Packaging & Delivery:
Packaging Details:
Flat packing which can use fork lift to unload
Delivery Detail:
20Days
About the trailer:
The form of trailer circuitry path :Connected with 7 core spiral
cable swift connector
Postpositive tailight, auto-circuitry of the whole trailer.
Form of tipping: back tipping,three way tipping. Provide with fuel
tank.
Form of air path connection: connected with spiral tube
Form of trailer oil pipe: nipple.
Surface treatment: Pickling phosphating
Surface spray coating: antirusting paint, finishing paint .
The process of trailer welding: carbon dioxide MIG welding.
The form of trailer transportation: parts and components, flexible
packing with the box plate
