|
[China]
Trade Verify
Address: H-No15, GuoTai north rd, Yangshe town,Zhangjiagang city,JiangSu province, China
Contact name:Alice Gu
Zhangjiagang City FILL-PACK Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Automatic PC Gallon Bottle Extrusion Blow Molding Machine Equipment
Hdpe Drum Making System
Extrusion system
Parts Description: Extrusion system uses reciprocating storage
chamber, twisted material power coupled with low-speed high-torque
hydraulic motor, energy-saving effect is significant.Length to
diameter ratio of 25: 1 screw. Screw and cylinder material using
high-quality nitriding steel, surface nitriding treatment, greatly
improve the wear resistance of screw and barrel and life. Extrusion
of the heating system using imported automatic temperature
controller, temperature control accuracy can be controlled at ± 1
℃. Extrusion heating using cast aluminum heater, cast aluminum
heater is equipped with a cooling fan, so that processing
temperature setting range is guaranteed. The hopper seat is
connected with circulating water cooling, which is convenient for
controlling the temperature of the inlet. Extruder platform with
automatic lifting device, can easily adjust the height of the die,
the best length to achieve waste side. Extruder platform is also
equipped with front and rear shift cylinder, easy to adjust the
front and rear die position, molding surface can not form the
center of the product.
| Screw diameter(mm) | 82 |
| Screw diameter ratio | 25:1 |
| Screw rotation speed(rev./min) | 10-50 |
| Plasticizing capacity | 90Kg/H(60second/pc) |
| Output | 0-50BPH |
| Heating zone | 5 |
| Heating power(kw) | 34 |
| Largest injection quantity(L) | 1.5 |
| Maximum product volume | 20L |
Die head
Part Description: The overall structure adopts the center of the
feed-type die, the flow path is shorter, the melt unit in the die
within the residence time difference is small. Parison
circumference wall thickness uniformity. The die is equipped with
imported MOOG wall thickness control system, which can effectively
control the stretch-ability of the PC raw materials, thus precisely
controlling the thickness of the products. Heating method using
stainless steel heating ring, temperature control using imported
automatic temperature controller. Temperature control accuracy can
be controlled at ± 1 ℃. The main parts of the die are made of high
quality nitrided steel and surface nitrided. To ensure smooth part
of the flow and ensure the hardness of the surface.
| Die Head Max Diameter(mm) | 82 |
| Heating zone | 4 |
| Heating power(kw) | 8.7 |
Mold clamping equipment
Parts Description: The opening and closing mold system adopts the
linear guide hydraulic two-way synchronous opening and closing mold
mechanism, convenient product removal and mold replacement,
suitable for the production of large-scale products, clamping force
average to ensure product joint precision.
| Template dimension(mm) | 440*600 |
| Template spacing(mm) | 330~780 |
| Clamping force(kn) | 210 |
Down blowing device
Parts Description: 82PC pure water bucket special machine adopts PC
special down blowing device, equipped with blowing multi-direction
blowing needle to ensure the blowing flow and uniformity during
blow molding. The lower blowing device can make three-direction
displacement adjustment, ,Convenient. Can also be based on your
special products to a special design.
| Blow head up and down stroke(mm) | 120 |
| Blowing head manually lift travel(mm) | 80 |
Pickup robot
Parts Description: Robot transmission rate is stable and reliable;
front and rear are equipped with a buffer device, the impact of
small; perfect cooling system to ensure smooth product off.
| Pick up journey(mm) | 1000 |
Rack
| Lifting journey(mm) | 250 |
Hydraulic system
Parts description: 82PC pure water bucket special machine adopts
proportional hydraulic control circuit. The oil pump adopts double
oil pump. It provides opening and closing molds, injecting
materials, lifting platform, moving head forward and backward,
multifunctional blowing. Import oil research brand, the system
control precision, smooth movement. Tubing with pressure-type
joints, import tubing, to ensure the reliability of the entire oil
system.
| Pump nominal pressure(Mpa) | 14 |
| Pump rated flow(L/min) | 180 |
| Hydraulic pump motor power(kw) | 45 |
Wall thickness control hydraulic servo system
| Nominal pressure(Mpa) | 6 |
| Rated flow(L/min) | 22 |
| Hydraulic pump motor power(kw) | 4 |
Pneumatic system
Parts Description: Pneumatic system for the products of inflation
molding and air supply for the robot power and control. Pneumatic
components concentrated in the electronic control box under the
pneumatic control panel, easy to operate and maintenance. Pneumatic
components using AIRTAC or FESTO (Festo) the company's products,
reliable quality and stable performance.
| Bleed pressure(Mpa) | 1.0 |
| Working pressure(Mpa) | 0.8 |
| Air consumption(M3 / min) | 0.6 |
Electrical control system
Parts Description: 82PC pure buckets dedicated machine is a
computer optimized design, automatic, high-speed machine,
electricity, liquid integration of large-scale blow molding
equipment. With easy operation, the process parameters set easy to
learn, fault alarm display and so on. Japan's OMRON series of
electrical programmable logic controller, input and output ports a
total of 2048 points, to meet a variety of products blowing.
Contactors, relays, frequency converter, temperature controller,
etc. are used in Japan OMROM, the machine has a high quality
assurance.
Source of water
| Feeding water pressure(Mpa) | 0.3 |
Power
| Voltage | AC380V±10% |
| Frequency | 50HZ |
| Wiring system | three phase four wire system |
| Total rated power(KW) | 91.7 |
| Average energy consumption(KW/H) | 45 |
Weight (ton) :11ton
Dimension(mm):5300*2700*4500mm
The configuration checklist is as follows:
| Item | Technical content |
| 1.Hydraulic unit | Oil Pump: HIGH-TECH |
| 2.Electronic control system | 1.PLC: (Japan OMRON) |
| 3.Opening and closing mold body | Form: hydraulic direct action clamping, two-way synchronization
mechanism |
| 4.Die | Die structure: storage materials |
| 5.Extrusion | Drive Type: Frequency Control |
| 6. Pneumatic system | Main air valve: AIRTAC (Taiwan) |
| 7. Gripping device (optional) | Cylinder: FESTO (Germany) rodless cylinder {optional} |
| 8. Motor | Origin: Siemens - Bed |
