Zhangjiagang City FILL-PACK Machinery Co., Ltd |
Verified Suppliers
|
|
Semi-Automatic PET Plastic 5 Gallon 20 Liter 1 Cavity Pure Water Gallon Bottle Blow Molding Machine / Equipment / Device
FP-120 blow molding machine is especially used to produce 3 gallon
and 5 gallon bottles and is widely used to produce any shape of
plastic from PET with neck finishes from 30mm-120mm.
●Perfect function with economic investment.
●Small size and compact construction with no space waste.
●Easy to operate and maintain ,operation by one person .
●Saving power and uneasy to worn out ,Adopting new double crank
four bars to lock mould, the cross fixed. Providing high pressure
blowing system.
●We can provide performs and various bottle& cap molds for 5
gallon and 3gallon bottles to meet customer’s requirements.
Settings:
1. Using the new clamping system with double crank four
tie-bars,the cross balanced fixed glide.
2. The seal,the stretch use the parallel bars union and combined
design,which is advantageous to the product formation.
3. The advanced air course design,the single-channel or
single-channel air admission;low pressure for clamping,sealing and
stretching;the high pressre for blowing the bottle.
4. PLC control system, the operaton is easy controled .
5. With infrared heating,controllable constant pressure
control,frequency conversion,thus achieves blows the perfect
bottle.
Features:
1. Conveying preforms automatically with conveyor.
2. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared preheater.
3. High safeties with security automatic-locking apparatus in each
mechanical action, which will make the procedures turn into a state
of safety in case of a breakdown in certain procedure.
4. No contamination and low noise with the air cylinder to drive
the action instead of the oil pump.
5. Satisfaction with different atmospheric pressure for blowing and
mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
6. Strong clamping force with high pressure and double crank links
to lock the mold.
7. Two ways of operating: Automatic and manual.
8. Safe, reliable, and unique design of the position of valve to
make the air pressure diagram of the machine easier to understand.
9. Contamination is avoided for the bottle body.
Main parameter:
Model | FP-120 | |
Container | Product material | PET |
Volume | 10L-20L(3-5Gallon) | |
Output | 150PCS/H | |
Max bottle length | 430mm | |
Max bottle diameter | 300mm | |
Moulding | Stretching stroke | 450mm |
Clamping force | 6000kg | |
Mould opening stroke | 360mm | |
Machine size and weight | Main machine (L x W x H) | 2350*750*1900mm |
Main machine weight | 1500Kg | |
Heater (L x W x H) | 2670*680*1650mm | |
Heater weight | 380Kg | |
Power | 10kw |
Spare part:
Items | Components | Model |
1 | Blow Moulding Machine | DY-120 |
2 | Preform Unscramble | DY-120 |
3 | HP Air Compressor | 3.6M3/min 30kg |
4 | LP Air Compressor | 1.6M3/min 10kg |
5 | Air Dryer | 2.0M3/min 30kg |
6 | Air Filters | 2.0M3/min 30kg |
7 | Air Tank | 0.6M3/min 30kg |
8 | Mould Chiller | 5HP |
9 | Blow Mould | 20L |
10 | PLC | Delta / Taiwan |