Home Companies Hebei Mingmai Technology Co.,Ltd

SWT-WP1 TPO Welding Machine 4200W Automatic Advertising Roof Waterproofing Sealed

Active Member

Contact Us

[China]

Contact name:Dennis

4200W Plastic Automatic Advertising Roof Waterproofing Sealed PVC Hot Air Welder

Hot Air Welder Description:

Roof waterproofing membrane welding machine is high quality automatic hot air welding machine,it is of new design and technology.

SWT-WP1 is allowed to be sold before strict inspection.

Hot Air Welder Specification:

Notice:

1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with

power

2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible

materials and explosive gases.

3. Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the

direction of people or animals.

4. The voltage rating stated on the welder must correspond to line/mains voltage (220V).

The drop cable / wire with protective earthed conductors can only be used.

5. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply

and leakage protection at the construction site.

6. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused

by high temperature.

Exploded View:

Fault diagnosis and solved ways:

The fault performance	Caused reasons	Solved ways
Welder cannot walk when hot air nozzle at the right place	Micro switch is not in right place	Move the hot air nozzle to the left and put it in place,then loosen adjusting screw Move baffle of micro switch to place micro switch in the right position
The position between hot air nozzle and drive roller is not right		Adjust the fixed set of hot air blower (by adjusting the screw under the fixed set of hot air blower)