Ship Boat Yacht 1 Input 12 Output 6.3mm Terminal Plastic Waterproof Fuse Holder With LED Indicator

Ship Boat Yacht 1 Input 12 Output 6.3mm Terminal Plastic Waterproof Fuse Holder with LED Indicator

Model: TR-FB1211
Name: waterproof 12 way fuse box
Net weight: 270G
Gross weight:
Size: 129.5*87*42mm
Input rated voltage: 32V
Input rated current: 100A
Output maximum current: 30A per road
Product material: PA66 base, PC dust cover, nickel -plated copper terminals, stainless steel screws, DIY stickers
Main connection terminal: M5 double head bolt (maximum 100A 32V DC)
Main line conductor:#4-6AWG
Single -line terminal: copper/nickel plating 1/4 "(6.3mm) (maximum 20A 32V DC)
Single-line conductor:#12-16AWG
Open hole size: 5.5*6cm
Product accessories: sticker X1; self -attack screw X4; 20A insurance film X4; 15A insurance film X4; 10A insurance film X2; 5A insurance film X2; suitable for 1A to 20A ATO or ATC fuse.

Fuse Function of  Ship Boat Yacht 1 Input 12 Output 6.3mm Terminal Plastic Waterproof Fuse Holder

When the circuit fails or abnormalities, the current is accompanied by the continuous increase of the current and the elevated current may damage some important devices or valuable devices in the circuit, which may also burn the circuit or even cause fire. The fuse protection electronic equipment is not damaged by current, and it can also avoid serious damage caused by electronic equipment due to internal faults. Therefore, there are rated specifications on each fuse, and the fuse will be melted when the current exceeds the rated specifications. If the fuse is placed correctly in the circuit, then when the fuse will increase to a certain height and a certain temperature at a certain height and a certain temperature, the fuse will be cut off and cuts the current, thereby protecting the safe operation of the circuit.

Advantages of  Ship Boat Yacht 1 Input 12 Output 6.3mm Terminal Plastic Waterproof Fuse Holder

[1] The product adopts PBT anti -flame retardant high temperature and temperature and environmental protection material, which fully meets [The fuse seat must have good mechanical strength, insulation, heat resistance, and flame retardant. Conditions of short circuit and other phenomena
[2] All bus and fuse clips are nickel -plated copper, which are resistant to corrosion resistance and excellent electrical conductivity
[3] All fasteners are stainless steel, the insurance box input, the output end is fixed with a tight screw, which can be installed faster quickly, and the insurance box is fixed with a self -attack screw, which is simpler and safer to install.
[4] Product gift stickers, according to the name marked on the sticker, the corresponding sticker is on the electrical appliance we connected.
[5] Product distribution fuse, you can choose the fuse of the Abe according to the current electrical appliance.

Application of  Ship Boat Yacht 1 Input 12 Output 6.3mm Terminal Plastic Waterproof Fuse Holder

Can be installed on the car, off -road vehicles, RVs, bus, yacht, boat, etc.

Contact Details:

Andy Wu

Email: andy@tianrui-fuse.com.cn

MP/Whatsapp: +86 13532772961

Wechat: HFeng0805

Skype: andywutechrich

QQ: 969828363