R14-C-1HB1 3PIN IEC C14 Inlet Male Connector Power Plug Socket With 5x20mm Fuse Holder

R14-C-1HB1 3PIN IEC C14 Inlet Male Connector Power Plug Socket With 5x20mm Fuse Holder

Description of Power Plug Socket With 5x20mm Fuse Holder

AC plugs need to be certified for safety and withstand voltage.

For low-frequency AC power plugs, radiation effects can be ignored.

The DC plug is usually low-voltage,Mainly considering the large current passing through,The contact surface should be large, and the resistance to pressure should not be considered.

If used in the case of high current and frequent plug,You have to think about the plug speed,Dc large current disconnection arc is very strong.

Structure of  3PIN Power Socket

Including: first ontology, a pair of electric connection parts inserted, and the second seat ontology, the first conductor piece, and described the second conductor, and described the third conductor and control guide wheel, its characteristics is described in the first set has sunken mouth, lower notch set of pathways of electrical connections blade admittance sets, electrical connection parts of blades can be used in the coupling of the electrical signals or power, whose character is: The second seat body is arranged with a baffle at the rear end of the first seat body in its lower end. The baffle is arranged on the side plates of the two sides and is included in the body of the first channel.

Described the first conductor piece, and described the second conductor plate and described the third conductor is curved shape, the base of the end, it is included in the set are described respectively the second seat body, and the second seat wear ear link at the bottom of the electrical control circuits or electronic device, and the other end of the first conductor piece is dependent on a fixed baffle, described the second seat contact part of the body as described in the other end of the second conductor piece also have set up a contact part, and described the first conductor piece contact link contact part and the other end of the third conductor piece set on a contact terminal;

Control wheel, described its opposite side edge connections are described respectively the second seat on both sides of the main board, so that the control of the guide wheel rotating pressure forming at the end of setting a contact part, and from the first seat body into slots in the channel, in the other side of the contact surface of, make the third conductor at the end of the piece of the contact surface of the smart contact tightly, so that the contact part described in the second conductor piece is not with a third conductor piece end of contact each other, from the first seat body notched electrical plugs, stated from the first conductor pressure contact part of the sheet,So that through the contact part of the rotating part of the contact part of the guide wheel, the second conductor piece and the contact end connected to the third conductor piece are connected to form the cutting action, the switch connector ACTS as a control for a multicast coach, etc.

Drawing of C14 Inlet Power Plug Socket

Contact Details
Andy Wu
Email: andy@tianrui-fuse.com.cn
Skype: andywutechrich
Tel: +86-13532772961
Whatsapp: +86-13532772961
Wechat: HFeng0805