6 Way 176g Marine Fuse Block With Negative Bus LED Indicator 12-16AWG

 
Marine Car Boat 6 Positions Way Circuit ATC ATO LED Automotive Blade Fuse Box Block Fuse Holder with Negative Busbar
 
Specifications of 6 Way LED Negative Fuse Holder
 
[Product Name]
 
Positive and Negative Auto Blade Fuse Holder with LED Indicator [1 Input 6 Output ]
 
[Net Weight]
 
176g
 
[Gross Weight]
 
183g
 
[Size]
 
88*87.75*36.5mm
 
[Material]
 
PBT base, PC cover, Nickel-plated copper connection terminal, PPX40 sticker
 
[Voltage]
 
 32V
 
[Input Rated Current]
 
100A
 
[Output Rated Current]
 
Each circuit 30A
 
[Indicator color]
 
Red
 
[Main Wire Terminal]
 
M5 Thread Stud
 
[Main Wire Gauge]
 
#4-6
 
[Single Wire Terminal]
 
M4 Thread Stud
 
[Single Wire Gauge]
 
 #12-16
 
[Indicator Function]
 
When the red LED light is on, it means the fuse has been disconnected and it needs to be replaced in time to continue running
 
[Application]
 
Can be installed in cars, villas, RVS, buses, yachts, boats, etc
 
[Usage]
 
It can be directly connected to the circuitry of any electrical appliances used on the vehicle/ship [such as: roof lights, headlights, view-width lights, fog lights, warning lights, on-board refrigerators, on-board chargers, on-board fans, on-board TELEVISIONS, etc.]
 
[Accessories]
 
StickerX2; self-tapping screw X4; We also can supply fuse if needed.
 

 
The Application of 6 Way LED Negative Fuse Holder
 
Each fuse in the fuse box can be connected to any electrical circuit (such as: car dome light, car headlights, wide light fog lights, alarm lights, car refrigerator, car charger, car navigation, etc.), when the current is too high, the fuse will burn itself out, thus playing a role in protecting the safe operation of the circuit.
 
The Details of 6 Way LED Negative Fuse Holder


 
 

 

 

 
Fuse Function
 
When the circuit is faulty or abnormal, the current will continue to rise, and the rising current may damage some important or valuable components in the circuit, or burn the circuit or even cause a fire. The fuse protects the electronic equipment from overcurrent damage, and can also avoid serious damage caused by the internal failure of the electronic equipment. Therefore, each fuse has a rated specification, and the fuse will blow when the current exceeds the rated specification. If the fuse is correctly installed in the circuit, the fuse will fuse and cut off the current when the current abnormally rises to a certain height and temperature, thereby protecting the safe operation of the circuit.
 
Product Advantages
 
[1] The product is made of PBT flame-retardant resistant high and low temperature environmental protection material, which fully meets the requirements of [The fuse holder must have good mechanical strength, insulation, heat resistance and flame retardancy, and should not be broken, deformed, burned or burned during use. Short circuit and other phenomena] conditions
[2] All bus bars and fuse clips are nickel-plated copper, which has corrosion resistance and excellent electrical conductivity
[3] All fasteners are made of stainless steel. The input of the fuse box and the output end are fixed with tightening screws, which can be installed more quickly. The fuse box is fixed with self-tapping screws, which is easier and safer to install.
[4] The product has a red LED indicator design, corresponding to each electrical appliance connected to the fuse, when the fuse is disconnected, the red light will be on, you can immediately know which fuse is broken, and it is convenient to deal with it in time
[5] The product is given a sticker, which can be affixed to the electrical appliances we are connected to according to the name on the sticker. When the fuse is broken and the red light is on, we can immediately distinguish which electrical appliance has the problem. save time and energy.
[6] The product is delivered with double fuses. When applied, the fuse is burned out and can be replaced from the spare fuse immediately, and the fuse has been delivered with multiple Abes. You can choose the Abe fuse according to the current electrical appliances.