High Heating Ability , Aluminum Brazing Furnace , Controlled
Atmosphere , Continous
Overview
Aluminum brazing furnace is designed for the continuous brazing of
the following products controlled under nitrogen atmosphere such as
aluminum water radiator, oil cooler, intercooler, serpentine type
condenser, evaporator, parallel flow condenser, laminated type
evaporator, air cooler of power station and etc.
Features
- The heating zone in the heating furnace is fine arranged, the
temperature is precisely controlled in the furnace (±0.2℃) and the temperature difference is lower than ≤±3℃ when brazing.
- In order to ensure the insulation quality, it uses the refractory
material with high performance.
- In order to achieve the low enery consumption of the pure
nitrogen, it is designed with advanced gas distribution
system and atmosphere curtain, in this case the production cost
will be lower.
- Advanced frequency conversion mesh-belt speed control system realizes stepless speed change transmission and precise control
runtime of workpieces in each heating zone so as to realize the
precise heating curve of aluminum brazing.
- In order to test the atmosphere in the aluminum brazing furnace
timely and accurately, it is equipped with high precision oxygen analyzer.
- The spray fluxer has the features of compact in design and
straightforward operation. The spray nozzle insures adequate spray
on the workpieces. Air blower insures the extra flux can be blew
off.
- High speed circulating air and high heating ability of dry oven ensure the parts going to the furnace will not bring any moisture
which will affect the brazing quality.
- Water cooling section realizes the cooling temperature could be
controlled and satisfy the requirement of process curve so as to
make the metallurgical structure of the joints fine and compact.
Aluminum Brazing Furnace Parameters
Model | Mesh-belt Width(mm) | Effective Using Space (W×H)mm | Standard Configuration | Total Power | N2Consumption m³/h | Cooling Water Consumption |
AJLL 1200 | 1200 | 1100×200 | Degreasing-Spray-Drying-Brazing | 780 | 70 | 8 |