Durable CATV PON WDM 1550nm EDFA Support 1 2 4 Output For FTTH Solution

CATV PON WDM Fiber Amplifier 1550nm EDFA Support 1 2 4 Output For FTTH Solution

 
Product Overview  

     JZEDFA series 1550nm fiber amplifier is a important optical relay transmission equipment during 1550nm optical communication system.In order to reach high index and dependability, main instruments are all adopted imported famous brand to cooperate microprocessor automatic control circuit and high dependability switch power to assemble up. High dependability, low noise, especially double pump design makes noise index better. Each main technique performance index and technique plane can compare with foreign similar machine. And with high performance to price ratio, it is suitable for using at large or middle-size network.

Performance Characteristic

■Adopt international famous brand pump laser with the advantage of low noise , low distortion, wide frequency band and, high output optical power.
■Imported high-performance erbium-doped fiber, high energy conversion efficiency.
■Support 1, 2, 3 or 4 output.
■Support two detachable backup power supplies.when the power supply module failure, just pull out the fault power module.220 vac and 48 VDC power supply module for option.
■Adopt radiator and fan cooling together, the cooling capacity tenfold increase.When the machine temperature more than 38 ℃, axial flow fan automatically start, regulate internal temperature, make the pump laser ATC control more accurate.
■Built-in microprocessor automatic monitoring circuit, real-time accurate monitoring of all kinds of working state of the input and output power and laser light, make sure the stability of the optical output power, and prolong the working life of the laser

■.When the scope of work parameter deviates from the set of safety equipment, the device automatically shut off the laser power, sound and light alarm at the same time.

The output power is able to adjust 5dB lower by front panel button.
■Built-in LCD display on the front panel, accurate display the working state parameters of the equipment accurately.
■With RS232 interface,RS485 industrial standard interface and RJ45 Ethernet interface (option) .It meet the needs of the various conditions, making it easy for users to choose convenient network management environment.
■Ethernet interface provides advanced network management function based on the SNMP protocol.Which meet the international standards.

■Meantime with integrated network card , with functions of Web Server, through the Ethernet interface connected to the Internet network, complete equipment under the HTTP browsing capabilities.

Block Diagram

Technical Specification

The technology parameters of the device reference to GY/T 184-2002<<Specifications and methods of measurement on analog optical fiber amplifiers used in CATV system >>

Test condition: with a standard optical transmitter, standard optical receiver and 10 km standard optical fiber composition test link.Under 550 MHz frequency range configure 59 PAL - D channel analog TV signals.Under 550 MHz~ 862(750) MHz frequency range transmit digital modulation signal: the digital modulation signal level (8 MHz bandwidth) is lower than analog signal carrier level 10 db, optical receiver input optical power of 0 DBM, measuring (C/CTB), (C/CSO) and (C/N).

Item		Unit	Parameters	remark
Product Name		CATV PON WDM Fiber Amplifier 1550nm EDFA Support 1 2 4 Output For FTTH Solution
Wavelength		nm	1550±10
Output optical power range		dBm	-3 ~ +10	Display range: -15~ +10dBm
Output power		dBm	13 ~ 24	optional
Optical power adjust range		dB	0 ~ -5
Output power stability		dB	±0.5
Popularization sensitivity		dB	<0.1
Noise Figure		dB	≤ 5	Input power 0dBm
Typical value of noise figure		dB	4.5
Optical reflection loss	input	dB	>50
	output	dB	>50
Pump leakage power	input	dBm	≤ -30
	output	dBm	≤ -30
(C/N)		dB	≥ 51
C/CTB)		dB	≥ 65
(C/CSO)		dB	≥ 63
Optical connector			SC/APC or FC/APC	option
voltage		V	~AC160V~250V (50 Hz)	DC48V option
working temperature range		℃	-5 ~ +55
Mechanical Power consumption		W	<20
Max working humidity		%	Max 95% non-condensing
storage temperature range		℃	-30 ~ +70
Max storage humidity		%	Max 95% non-condensing
Dimension		mm	483(length)╳ 381(width)╳ 44(height)
Front Panel
Rear Panel