Active Member
|
[China]
Address: Tiaoqiao district,Jinan,Shandong,China
Contact name:lily
Flytech CNC Equipment(Ji'nan) Limited |
|
|
Portable CNC Plamsa Cutting Machine
Features
This product with reasonable overall structure is the lightest, most economical cutting machine. Transversal effective cutting width is 1.0m and 1.2m and longitudinal effective cutting length is 1.5, 2m, 2.5m. With automatic ignition and the electronic lifting system, it supports two cutting ways of plasma and flame. It can be applied to metal materials or non-ferrous metal cutting of medium and small enterprises. It can be used in either indoor or outdoor situations. Any complex plane Graphics can be cut. Flexible, easy to use, move anytime, it do not occupy fixed sites.
Application
It can cut mild steel (flame cutting) and high carbon steel, stainless steel, aluminum, copper and other non-ferrous metal (plasma cutting), etc, be widely used in industries such as machinery, automobile, ship building, petro-chemical, war industry, metallurgy, aerospace, boiler and pressure vessel, locomotive etc.
Technical parameters
Model | FT-1020 | 1225 | 1525 | |
Power source | 220±10%VAC 50/60Hz 220W | |||
Cutting mode | O2/C3H8 or C2H2, Plasma available | |||
Effective cutting range | 1000×20009(mm) 39.4*78.8(inch) | 1200×2500(mm) 47.98.4(inch) | 1500×2500(mm) 59*98.4(inch) | |
Track L×W×H | 2500×273×60(mm) 98.4*10.7*2.4(inch) | 3000×273×60(mm) 118*10.7*2.4(inch) | 3000×273×60(mm) 118*10.7*2.4(inch) | |
Track Holder Quantity | 2 | 3 | 3 | |
Track Holder L×W×H | 500×80×40(mm) 19.6*3.1*1.6(inch) | |||
Cutting speed | 0-3500mm/min (Max 4000mm/min available) 0-137.7inch/min(Max157.4inch/min available) | |||
Cutting thickness(Flame) | 5-150(mm) (O2/C3H8 or C2H2) 0.2-6(inch) | |||
Cutting thickness(Plasma)(mm) | In terms of plasma power source | |||
Move precision | ±0.2mm | |||
Torch | Flame,electric height adjustment(±60mm or 2.4inch) | |||
Host weight(kg) | 19 | |||
Total weight(kg) | 120 | 130 | 140 | |
Gas pressure(Mpa) | Max0.1 | |||
Oxygen pressure(Mpa) | Max0.7 | |||
Type of gas | Propane, Acetylene | |||
Emergency stop | Yes | |||
Working temperature | -5~45°C | |||
Relative humidity | <95% No condensing | |||
Remark:Standard configuration is 2# propane cutting nozzle if no special requirement. | ||||
Tailor-made track if request. | ||||
Machine pictures
