Home Companies Wuxi Dingrong Composite Material Technology Co.Ltd

FRP Fiber Reinforced Plastic Rod Smooth High Modulus For Optic Cables

Wuxi Dingrong Composite Material Technology Co.Ltd

Contact Us

[China] country

Trade Verify

Address: 1510room Jiafu building, 97# Renmin middle road,Wuxi city,Jiangsu province, China

Contact name:Zhu

Inquir Now

Wuxi Dingrong Composite Material Technology Co.Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

FRP Fiber Reinforced Plastic Rod Smooth High Modulus For Optic Cables

Country/Region china
City & Province wuxi jiangsu
Categories Other Fiberglass Products
InquireNow

Product Details

Fiber Reinforced Plastic FRP Rods For Fiber Optic Cables

 

FRP stength member (FRP Rod) is a new type of high-performance engineering composite material prepared by pultrusion process with resin as the matrix material and glass fiber as the reinforcing material.It is a new type of high performance non-metallic cable reinforcement. FRP strength member overcomes the defects of traditional metal cable reinforcements, has excellent corrosion resistance, lightning resistance, electromagnetic field interference resistance, high tensile strength, light weight, environmental protection, energy saving, etc., and is widely used in a variety of fiber optic cable.

 

1) not sensitive to the lightning strike, applied to the areas which are common with frequent lightning and rain;

2) Not obstructed by induced current and can be installed close to the power unit and device;

3) No harmful gas that would affect the optical transmission indicators;

4) Has the characteristics of high tensile and light weight;

5) bullet-proof, ant-proof and anti-tooth proof.

 

PropertyValues
Tensile strength (Mpa)≥1100
Tensile modulus (Gpa)≥50
Flexural strength (Mpa)≥1100
Flexural modulus (Gpa)≥50
Elongation at break (%)≤4
Coefficient of linear thermal expansion (-30-80℃) (1/℃)<8×10-6
Diameter tolerance (mm)±2%
Density (g/cm³)2.05~2.15
Minimum bending radius (mm)40×D
High temperature bending test (50D,100℃,120h)No bur, cracks and break

 

• Light Weight & Excellent Tensile Strength
• Prevent Cable Buckling
• Most Suited for Multi-Loose Tube, Uni Tube, Slotted Core & Ribbon Cable Designs
• Used as Central or Peripheral Reinforcement in Fibre Optic Cables
• Dual Advantage : Reinforcement during Installation as well as Reduce Stress on Signal Carrying Optic Fibre /Conductor
• Prevent Sagging in Aerial Installation
• Cost Effective Solution as a Strength Member

 

Features:
* High tensile strength, high modulus, low thermal conductivity, low elongation, low expansion, and wide temperature range;
* Non-metallic materials are not sensitive to electric shock, and are suitable for areas with multiple lightning and rainy weather conditions
* Chemical resistance, compared with the metal core, the GFRP reinforcing core does not affect the fiber transmission index
* The fiber optic cable using the GFRP reinforcing core can be installed next to the power line and the power supply device, and is not interfered by the induced current generated by the power line
* Smooth surface, stable size, easy to process and lay, and the application range is wide.

Hot Products

Pultrusion Fiber Optic Cable FRP Central Strength Member Pure imported high-density FRP with high ...
GFRP rod strength member for communication cable Composite cable strength member widely known as FRP...
FRP Optical Cable Core Fiberglass Rod Glass Fiber Reinforced GFRP The structural strength of optical ...
0.40-5.00 Mm Heat Resistant Frp Cheap Fiber Glass Frp Rod​ Technical characteristics: 1. It has the ...
Fiber Reinforced Plastic FRP Rods For Fiber Optic Cables FRP stength member (FRP Rod) is a new type ...
GFRP Fiberglass Rod 2.5mm Glass Fiber Reinforced Plastic Strength Member FRP is a Fiberglass...