|
[China]
Trade Verify
Address: No.3 Jinle Road, Jinfeng Town,Zhangjiagang City, Jiangsu Province,China
Contact name:Coco
Zhangjiagang Friend Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
PLA ABS PA PET HIPS TPU TPR 3d printing filament extruder machine
AS 3D printing industry is developping so hot now. 3D printing filament is becomming most popular printing materials in this period. Our Zhangjiagang Friend machinery Co.,LTD developed the ABS PLA 3D Printing Plastic Filament Extruding Machine cor customer to produce good quality 3d printing filaments to resell and get profit.
Our ABS PLA 3D Printing Plastic Filament Extruding Machine has advantages of high accurancy production final products, our ABS PLA 3D Printing Plastic Filament Extruding Machine can produce within ±0.02mm filament. So we have advanced technology in ABS PLA 3D Printing Plastic Filament Extruding Machine .
3D Printing Filament Machine advantages as follows:
1 Big capacity compared with other suppliers who use the same
model.
2 Lowest tolerance:+/- 0.02 mm.
3 Both 1.75 and 3.00mm filament diameter
4 It can process multi-materials like PLA ABS PET PA HIPS .
5 Easy operation: SIEMENS PLC full-auto controling system
| Machine | Quantity |
| Hopper dryer | 1SET |
| Extruder | 1SET |
| Mould and die | 2SETS (1.75mm and 3.0mm) |
| 4 Meter Hot water tank | 1SET |
| 2 Meter Cold water tank | 1SET |
| Laser measuring machine | 1SET |
| Haul off machine | 1SET |
| Winding machine | 1SET |
Application:
abs 1.75mm 3d printer filament extrusion line has been used by
designers, engineers and scientists to produce the disposable
mechanical products and model, and it is already widely used in
health care, education, toys, building, automobile, electronics,
and anime field.
Feature:
1. Information of the PLA, PA Nylon, PC ,and HIPS and ABS
filaments,
2. ABS filament process temperature is 230-260° C,melting point is
230° C
3. PLA 3D printer filament is 210-235°C, melting point is 200°C
4. PVA temperature for printer is 180°C-200°C.Melting point is
200°C.
5. PA Nylon temperature for printer is 220°C-250°C.Melting point is
260°C
6. PC temperature for printer is 230°C-250°CMelting point is 260°C.
7. HIPS filaments temperature for printer is 160°C-220°C,Melting
point is 230°C.
1. Produce process
I . Before produce extruding filament ,we will dry ABS and PLA for
a enough time (1-1.5 hours).
II. Mix with colors masterbatch or colors powder, all which .
III.Adjust temperature and dragging rate , make filament diameter
range at 1.7-1.8mm/2.95-3.05mm, roundness +/-0.05mm, each spool net
weight 1kg+/-0.02kg
2. About waste & recycle
3d printing PLA filament extruding machine Much time you will find
some black filament is too brittle, that added and mixed with some
recycle and scrap after produced.
Winding Machine For 3D Printing
