CHUANGXINDA ELECTRONICS-TECH CO., LIMITED |
|
AD8603AUJZ-R2 Precision Amplifiers SINGLE TSOT-23-5 Op Amps
Product Attribute | Attribute Value |
---|---|
Analog Devices Inc. | |
Precision Amplifiers | |
AD8603 | |
1 Channel | |
316 kHz | |
0.1 V/us | |
100 dB | |
500 pA | |
12 uV | |
25 nV/sqrt Hz | |
5 V | |
1.8 V | |
40 uA | |
- 40 C | |
+ 125 C | |
No Shutdown | |
SMD/SMT | |
TSOT-23-5 | |
Cut Tape | |
MouseReel | |
Reel | |
Height: | 0.87 mm |
Length: | 2.9 mm |
Output Type: | Rail-to-Rail |
Product: | Precision Amplifiers |
Type: | General Purpose Amplifier |
Width: | 1.6 mm |
Brand: | Analog Devices |
Input Voltage Range - Max: | 5.2 V |
Development Kit: | EVAL-CN0287-SDPZ |
Dual Supply Voltage: | 0.9 V to 2.5 V |
Maximum Dual Supply Voltage: | 2.5 V |
Minimum Dual Supply Voltage: | 0.9 V |
Operating Supply Voltage: | 1.8 V to 5 V |
Product Type: | Precision Amplifiers |
PSRR - Power Supply Rejection Ratio: | 100 dB |
Factory Pack Quantity: | 250 |
Subcategory: | Amplifier ICs |
Voltage Gain dB: | 120 dB |
Unit Weight: | 0.000430 oz |
The AD8603/AD8607/AD8609 are single/dual/quad micropower
rail-to-rail input and output amplifiers, respectively, that
feature very low offset voltage as well as low input voltage and
current noise.
These amplifiers use a patented trimming technique that achieves
superior precision without laser trimming. The parts are fully
specified to operate from 1.8 V to 5.0 V single supply or from ±0.9
V to ±2.5 V dual supply. The combination of low offsets, low
noise, very low input bias currents, and low power consumption
makes the AD8603/AD8607/AD8609 especially useful in portable
and loop-powered instrumentation.
The ability to swing rail to rail at both the input and output
enables designers to buffer CMOS ADCs, DACs, ASICs, and
other wide output swing devices in low power, single-supply
systems.
The AD8603 is available in a tiny 5-lead TSOT package. The AD8607
is available in 8-lead MSOP and 8-lead SOIC packages.
The AD8609 is available in 14-lead TSSOP and 14-lead SOIC packages.