Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Micro Load Cell 20 lb Miniature Weight Sensor 10lb Small Weight Transducer 5 lb
Micro Load Cell FMZK is strain gauge based to deliver 1.0mV/V output
from full wheatstone bridge. Small load sensor FMZK offers 0.5kg / 1kg / 2kg / 3kg / 5kg / 6kg / 10kg seven measuring ranges to choose from,high accuracy with maximum
0.05% non-linearity of the full capacity.The 1000 ohms resistance
strain gauges used are more energy-efficient compared to common 350
ohms gauges.The compact size and aluminum construction makes
FMZK weighs only about 5.3 grams which makes it suitable for
portable weighing devices.Small size weight sensor FMZK offers
a perfect mixture of small size,high accuracy and low cost,which
makes inexpensive loadcell FMZK suitable for weight monitoring in
consumer electronics.You may find Miniature Load Sensor FMZK applicable for home appliances, force simulators, process
control, robotics, automotive and so on. Forsentek is also capable
of and willing to provide custom made service if you cannot find
suitable weight/load/force measurement transducers from the
standard product portfolio.
Dimensions
Specifications
| Rated capacity | 0.5kg / 5N / 1.1lb 1kg / 10N / 2.2 lb 2kg / 20N / 4.4lb 3kg / 30N / 6.6 lb 5kg / 50N / 11 lb 6kg / 60N / 13.2lb 10kg / 100N / 22 lb |
| Rated output | 1.0 mV/V |
| Excitation | 3-10 V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.05% of R.O. |
| Hysteresis | ±0.05% of R.O. |
| Nonrepeatability | ±0.05% of R.O. |
| Creep(3min) | ±0.05% of R.O. |
| Safe overload | 120% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift zero | ±0.03% of R.O./oC |
| Temperature shift span | ±0.02% of R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy |
| Cable | 32AWG*170mm(Longer cable available) |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Small size load cell sensor FMZK is a transducer that converts
mechanical force into electrical signal proportional to the applied
force or weight.The measured load or force causes deformation of
the measuring element(elastic body),the bonded strain gauge deforms
accordingly which will cause the impedance variation of the
wheatstone bridge,under constant power supply, the output signal
changes proportionally, thus the weight or force can be measured by
measuring the output signal from the load cell.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of micro load cell FMZK is normally around 1.0mV/V.
Power supply of miniature weight sensor FMZK is normally within
3-10V.
Load / Capacity is within 0-1.
So the output range of small weight transducer FMZK is normally
within 0-10mV.
Example one: Miniature Load Sensor FMZK-5kg with 1.0mV/V
sensitivity powered by 3.3V DC,the output range is 0~3.3mV.
Example two: Micro Weight Transducer FMZK-10kg with 1.0mV/V rated output powered
by 5V DC,the output range is 0~5mV.
Micro Load Cell 20 lb Miniature Weight Sensor 10 lb Small Weight Transducer 5 lb
