Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Tri-axial Load Cell 500kg 300kg 200kg 100kg 50kg 30kg 3-Axis Force Load Cell
Low profile Triaxial Load Cell F3F is designed to measure force in Fx/Fy/Fz at the same
time. Tri-axial force sensor F3F offers 0-20kg / 0-30kg /
0-50kg / 0-100kg / 0-200kg / 0-300kg / 0-500kg rated measuring
ranges for each axis to choose from,each channel is able to measure
force in both tension and compression direction.Compact design
makes 3-component load cell F3F suitable for 3-axis force
measurement applications with limited mounting space.You may find
3D force sensor F3F interchangeable with interface 3-axis force load cell 3A120 series. Typical applications for this type of transducer are
for example force exertion control in robotics, automotive crash
testing, industrial test benches, grinding force control, actuator
operating force measurement,etc.
Dimensions(in milimeter)
Specifications
| Rated Capacity | 200N / 45lb / 20kg |
| Sensitivity | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Non-repeatability | ±0.1% R.O. |
| Creep(5min) | ±0.05% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 700±100 ohms |
| Output resistance | 700±100 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP65 |
| Material of element | 0-1kN: Aluminum |
| Cable | Ø6*3000mm 12-core shielded |
| Wiring code | 4-wire connection for each axis |
A 3-Axis Sensor is a force transducer that measures forces in Fx,
Fy, Fz direction at the same time,each axis consists of a full
wheatstone bridge to deliver mV/V output proportional to the
applied load, a 3-channel load cell signal amplifier LC3A can be
used to convert the mV signal into -5-5V, 0-10V, 4-20mA for easy
signal processing. 3 axis load cell F3F can also be modified or customized as per client's request.
Triaxial Load Cell 500kg 300kg 200kg 100kg 50kg 30kg
Multi-Axis Load Cell Sensor
