Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
5/10/20/30/50kg S Type Tension Compression Load Cell With M8 threaded hole
M8 Threaded S-beam Tension And Compression Load cell Force Sensor FS6A/FS6B is strain gauge based intended for tension and compression force measurement.S beam load cell FS6A/FS6B offers 0-5kg / 0-10kg / 0-20kg / 0-30kg / 0-50kg / 0-100kg / 0-200kg / 0-300kg eight rated measuring ranges to choose from. M8/M12 metric threaded holes located on both ends can be used to mount attachments such as eye bolts and hooks for adapt to different cases. S type load cell FS6A/FS6B offers an accurate and affordable measuring solution for applications such as material testing machines, hanging scales, hopper weighing, automation equipment and so on.
Specifications
| Capacity | 5kg / 50N / 11lb 10kg / 100N / 22 lb 20kg / 200N / 44 lb 30kg / 300N / 66lb 50kg / 500N / 110 lb 100kg / 1kN / 220lb 200kg / 2kN / 440 lb 300kg / 3kN / 660lb |
| Rated output | 2.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.05% R.O. |
| Hysteresis | ±0.05% R.O. |
| Nonrepeatability | ±0.03% R.O. |
| Creep(5min) | ±0.03% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 385±50 ohms |
| Output resistance | 380±30 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP50 |
| Material of element | Alloy steel |
| Cable | Ø5.5*2000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within
0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: FS6A-50kg with 2.0mV/V rated output powered by 3.3V
DC,the output range is -6.6mV...+6.6mV.
Example two: FS6A-30kg with 2.0mV/V rated output powered by 10V
DC,the output range is -20mV...+20mV.
Load cell + Signal amplifier:
Load cell normally outputs -30mV...+30mV which sometimes cannot be
recognized by signal processing units directly,so signal
conditioner is introduced to convert mV signal into
0-5V/0-10V/4-20mA for easy signal processing.
Example: FS6A-20kg working with -5-5V amplifier,the load-output
relationship will be 0~20kg compression load VS 0~5V output,0~20kg
tension load VS 0~(-5V) output,the voltage output is proportional
to the load value.
M8 threaded S-beam load cell tension compression force sensor
