Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Miniature Tension And Compression Load Cell With M4 Theaded Hole
Miniature Tension Compression Load Cell FCU is made from stainless steel based on strain gauge technology delivering unamplified mV output which is proportional to the load applied. Small Size Pancake Load Cell FCU offers 0-100N / 0-200N / 0-500N / 0-1000N four rated measuring ranges intended for both tension and compression force measurement. The miniature load cell FCU features a M4 tapped hole at the center of the transducer which can be used to mount attachments such as load buttons or eye bolts to fit different applications. Micro Load Cell FCU is applicable for both static and dynamic force measurement. Model FCU can also be modified or customzied as per requirements of our clients.
Dimensions
Specifications
| Capacity | 100N / 10kg / 22.5lbf 100kg / 1kN / 220lb |
| Rated output | 1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*4000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- |
Miniature Tension And Compression Load Cell With M4 Theaded Hole
Brief instruction of Rated output(or Sensitivity):
Definition: The signal produced by load cell(or force transducer)
when rated load is applied, expressed in terms of mV/V. The rated
output indicates the output signal range of a sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output of miniature compression load cell FCU is
normally around 1.5mV/V.
Power supply of small compression sensor FCU is normally within
3-12V.
Load / Capacity is within 0-1.
So the output range of miniature force sensor FCU is normaly
within -18mV...+18mV for bidirectional force measurement.
Example: Miniature Load Cell FCU-1000N with 1.5mV/V power by 5V
DC,the output range is -7.5mV...+7.5mV proportional to the applied
force.
Load cell + Signal amplifier:
The mV output from the loadcell transducer sometimes cannot be
recognized by signal processing units directly,so signal
conditioner is introduced to convert mV signal into
0-5V/0-10V/4-20mA for easy signal processing.
Example: Miniature Tension Compression Load Cell
FCU-50N working with -5-5V amplifier,the load-output
relationship will be 0-50N compressive load VS 0-5V output, 0-50N traction load VS 0-(-5V) output,0V output corresponds to 0N, 1V output corresponds to 10N
compression load, -2V output corresponds to 20N tensile force,and
so on.
Miniature Tension And Compression Load Cell With M4 Theaded Hole
