Active Member
|
[China]
Address: R1506 World Trade Center Anyang Henan China 455000
Contact name:
ZIZI ENGINEERING CO.,LTD |
|
|
Butt Weld Elbow NPS 1/2"-80" 45 Degree / 90 Degree / 180 Degree LR SR Pipe Fitting
Butt weld elbow is a basic pipe fitting that used to changed the direction of pipe system in a certain degree. It has large selection for the dimensions and materials, we offer full size range buttweld pipe elbow in diverse types.
The commonly used steel pipe elbows are 45 degree elbow, 90 degree elbow and 180 degree elbow. Both 90° elbow and 45° elbow are available in long radius and short radius, 45° elbow is short radius more often.
Diameter | 1/2"-80" |
| Schedule | Sch10,20,30,STD,40,60,XS,80,100,120,140,160,XXS |
| Standard | ANSI,ASME B16.9 |
| Degree | 45 Degree,90 Degree,180 Degree |
| Radius | Long Radius ,Short Radius |
Stainless Steel 90 Degree Elbow
ASTM A403 WP304/304L/304H, WP316/316L, WP310, WP317, WP321, WP347
Carbon Steel 45 Degree Elbow
ASTM A234 WPB, A860 WPHY42, 52, 60, 65, 70, A420 WPL3 / 6 / 9
Alloy Steel Short Radius Elbow
ASTM A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91
Duplex Steel Long Radius Elbow
ASTM A815 UNS S 31803, 32205, 32550, 32750, 32760.
It changes the pipe flow in 90 degree so that it also named as vertical elbow. It is one of the most commonly used elbow type in all pipe systems, and suits for steel construction and structural.
45 Degree elbow produces less friction compared to 90 degree elbow, but it withstand lower pressure. It is change the fluid direction in 45 degrees.
Also know as return elbow, it provide 180 degrees direction change. The application is limited to minimum deposition and low turbulence system because it usually results in low pressure.
Long Radius Elbow
Any degrees elbow is available in long radius, it means the radius of elbow is equal to 1.5 times of its diameter.
Short radius elbow is often used when space is not enough. Its radius is equal to its diameter.
W=0.0387 * S( D – S ) * R / 1000
W = Weight (kg/piece).
S = Thickness Schedule.
D = Nominal Diameter.
R= Radius
For butt weld pipe fittings, we finially pack them into wooden cases or pallets based on their sizes.
The products will be wrapped with plastic film before put them into wooden cases or pallets.
