Active Member
|
[China]
Address: 3-301 of Yangguang Shuncheng , Shunshi Road , Shizhong Disctrict, , Jinan
Contact name:SONG Pein
Jinan Darin Machinery Co., Ltd. |
|
|
Produ
cDog Chewing Snacks Machine/Pressing Machine Made By Rawhidet De
s
c
Product Description
Rawhide pressed bones making machine could produce pet chewing bone
with cowhide, pigskin or sheepskin as material. It could press the
material to be various shapes and sizes.
Features
1, This Punching Machine is type of Flour Column and Three Board,
the up-most output tonnage is 20t.
2, It can be adjusted among the range of 5t-20t according to the
different products’ procedures, the purpose is to arrive the best
required output. Cylinder Stroke is 200mm, (slide stroke is 200mm).
3, Punching Machine’s middle plate and lower plate open two-article
T-slot respectively, the pressure system is rear-mounted and the
below equips with horizontal floor mat.
Technical Parameters
Project | DR-60T |
Liquid Pressure of Work (MPa) | 14-21 |
| 5-20 |
| Left and Right 500 |
| |
Working surface size (mm) |
|
Front and Back 400 | |
Height of Working Table Off the Ground(MM) | 780 |
Biggest Operational Height(mm) | 400 |
Close(mm) | 200 |
| 200 |
Motor Power | 15KW |
Structural Style | Flour Column Three Board |
| Above Oil Cylinder |
| 380VAC,50/60Hz |
Weight | 1108kg |
Dimension | 600*500*1780mm |
Commissioning Service
1. We make accurate factory layout design according to customer’s
factory size; if the customer needed, we could make workshop design
with electricity power, water supply, gas power, material storage,
final storages, worker’s restroom, etc.
2. After delivering machines to client’s factory, we start to apply
for the Visa to client’s country immediately; normally the vessel
needs 20-60 days to the required port, so we have enough time to
get the Visa. While the machines arrives your factory, our
engineers are ready to start for the commissioning service.
3. 1-2 of our engineers will go to your factory to install and
adjust the processing line to realize normal production at shortest
time.
4. Our engineers have responsibility to train and teach the workers
how to operate, clean, maintain and repair all the machines, until
the workers could well operate the processing line.
5. It normally costs 10 days for the commissioning
service, and we supply 1 year guarantee from the date of completion
of commissioning service.
6. The engineer’s round-trip flight tickets, accommodation and
daily salary USD 60 are on client’s account.
