|
[China]
Trade Verify
Address: NO.258-6,Jinhua Doad,Wujin Economic Development District , Changzhou , Jiangsu Province , China
Contact name:Jim Gu
Focusight Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Upto 200mm Size Double Side Printed Tag Quality Inspection System, with Fully Suction Platform
Product Technical Specification-FS200-GECKO-P2N2
Full machine configuration
| Project | Configuration instructions | Number | Description of the function | -Select | |
| Detection system configuration | Front direct-shooting station | Imported high-speed RGB color 4096 pixel scan camera | 1 | General printing defects , die-cutting, Commodity code | √ |
| Imported optical imaging lens | 1 | √ | |||
| Dedicated bar light source . | 1 | √ | |||
| High-speed image processing computer workstation (high-speed image capture processing card)) | 1 | √ | |||
| Front angled position | Imported high-speed 4096 cell-line scanning camera | 1 | Light oil bias, missing Convex oil bias, missing Embossed bias
| √ | |
| Imported optical imaging lens | 1 | √ | |||
| Dedicated Oblique Light Source . | 1 | √ | |||
| High-speed image processing computer workstation (high-speed image capture processing card)) | 1 | √ | |||
| Reverse direct-shooting station | Imported high-speed RGB color 4096 pixel scan camera | 1 | General printing defects die-cutting bias Commodity code | √ | |
| Imported optical imaging lens | 1 | √ | |||
| Dedicated bar light source. | 1 | √ | |||
| High-speed image processing computer workstation (high-speed image capture processing card)) | 1 | √ | |||
| Reverse reflection station | Imported high-speed 4096 cell-line scanning camera | 1 | l Convex oil bias, missing l embossed bias
| √ | |
| Imported optical imaging lens | 1 | √ | |||
| Dedicated Reflection Light Source. | 1 | √ | |||
| High-speed image processing computer workstation (high-speed image capture processing card)) | 1 | √ | |||
| Detection of software configurations | Print inspection module dedicated vision inspection software FSCheck V2.1.1 | 1 | √ | ||
| Mix detection module | 1 | Mixed code | √ | ||
| Defect Detection Statistics Report | 1 | Document reports that count the types and numbers of defects | √ | ||
| Detection of supporting equipment | Special dust-removal closed electric cabinet for printing detection | 1 | Protection detection devices and partial dust protection | √ | |
| 22-inch LCD and keyboard mouse | 1 | √ | |||
| Sound and light alarm device | 1 | √ | |||
| Rear display | 1 | √ | |||
| Mechanical platform configuration | Mechanical transmission platform structure configuration | Friction card issuer | 1 | √ | |
| Note: double-sided water-based photooil or film class, such as scratch-prone products are not within the scope of this specification agreement; | |||||
| Electrostatic dust removal device | 1 | √ | |||
| Fish scale syield collection mechanism | 1 | √ | |||
| Fish scale satosing collection facility | 1 | √ | |||
| Replica Reject Ingesta (Note 1) | 1 | √ | |||
| Electrical support ingen-care system | 1 | √ | |||
| Strong electrical components of mechanical platforms | German SEW main motor | 1 | 4KW Supply Host Main Drive Power | √ | |
| German SEW paper transfer motor | 1 | 1.5KW supply paper cloth set drive power | √ | ||
| Pump | 2 | 2 units of4KW | √ | ||
| Collectthe motor | 1 | 0.4KW | √ | ||
| Waste-receiving motors | 1 | 0.4KW | √ | ||
Note 1: This transmission system requires the user to provide a factory concentrated gas source or an external air compressor for equipment scrap removal.
2.3 Device function parameters
| Project | Function parameters |
| Maximum detection speed | 150 / |
| Maximum detection size | 200mm )x300mm(length)( length is more than 140mm,host speed needs to be reduced appropriately) ) |
| Minimum detection size | 40mm )x70mm(length) |
| Adapting to paper weight | 150to350g/m2 |
| Field of view | 220mm |
| Imaging accuracy (mm) | Front imaging accuracy (direct-shooting station):0.054mm x 0.075mm(4K camera) Front imaging accuracy (oblique station):0.054mm x 0.15mm(4Kcamera) Reverse imaging accuracy (direct-shooting station):0.054mm x 0.075mm(4K camera) Reverse imaging accuracy (reflected station):0.054mm x 0.15mm(4Kcamera) |
| General defect detection (when defect contrast is greater than 40 levels) | 1. Minimum detection area of defects such as leakage, dirty points: s0.15 mm2 2. Minimum detection area of hot burn defects: .2mm2 3. Overprint bias detection:.1mm 4. Die-cutting deviation detection:.1mm 5. Pull line: can detect a horizontal or vertical pull line that is wider than 0.1mm vertical, or 0.2mm wide horizontal, more than 15mmin length, and a contrast greater than 40 levels; 6. Local Chromatic Abercheck Detection , E-3ELab |
| Mechanical profile size | 3.65m x 1mx1.49m (L * W * H) standard |
| Equipment footprint | 3.65m x 2mx1.8m (L * W * H) |
| Mechanical weight | 2 tons |
| Full machine power | 10KW |
Inside Pictures:
