|
[China]
Trade Verify
Address: Room 2010, Building4, Jianfa Fortune Plaza, 191 Tongyi St., Qingyang District, Chengdu, China
Contact name:Liu
Sinof Hi-tech Material Co., Ltd. |
|
Verified Suppliers
|
|
|
White and Semi-transparent PVDF Pellet For Extrusion Processing DH-F22E-1 with MFR 4-8
Product Description
Polyvinylidene fluoride (PVDF) is the homopolymer of vinylidene fluoride (VDF). It is a new fluorocarbon thermoplastic with excellent mechanical performance, good impact resistance, abrasion resistance, weatherability and chemical stability. It is widely used in chemical industry, electrical and electronic industry, food industry, space industry and architectural decoration industry as it can be used to produce pump valves, pipe fittings, films, wire insulating layers, lithium battery adhesive and fluorocarbon coatings.
Grades and Technical Properties
| Item | Unit | ASTM Test standard | DH-F22E-1 | DH-F22E-2 |
| Appearance | / | / | White and semi-transparent pellets | |
| S.S.G | / | ASTM D792, @23/23℃ | 1.77~1.79 | |
| Melting Point | ℃ | ASTM D3418, 10℃/min | 172~175 | 164~172 |
| MFR | g/10min | ASTM D1238, 230℃/5kg | 4~8 | 8~13 |
| Water absorption | ％ | ASTM D570 | ≤0.05 | |
| Tensile yield strength | Mpa | ASTM D638, 50mm/min@23℃ | ≥35 | |
| Yield elongation | ％ | 5~10 | ≥10 | |
| Tensile strength | Mpa | ≥30 | ≥25 | |
| Elongation at break | ％ | ≥50 | ||
| Hardness | Shore D | ASTM D2240 | 76~80 | |
Process safety instructions
1. This product should be processed under 370℃,to avoid producing toxic gases;
2. PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;
3. Operators should take good care of personal protection during the use procedure and processing.
Packaging and storage
1. 25 kg and 250 kg packages can be provided. PVDF is packed in double layer of polyethylene plastic bag and then put into a hard cardboard drum.
2. It must be stored in clean, cool, dry place.
