Jiangsu Zhongxinhe New Material Technology Co., Ltd. |
Verified Suppliers
|
|
2mm High-End IXPE Foam Underlay With PE Film For Floating Flooring Confort Step
Introduction:
IXPE makes great flooring underlayment due to its closed-cell structure and controllable expansion ratio. The lifespan of IXPE is also significantly longer than traditional PE foam.
As a material, IXPE is good for acoustical insulation, thermal insulation, mold & mildew resistance, and is flame-retardant. It also has excellent waterproof performance since the water absorption rate of the product is almost zero.
Feature:
1) Get sound absorbtion to reduce impact and click noises.
2) Use IXPE underlay to smooth out the undulations in your floor
3) Hollow step sounds are also absorbed to give you a more muted walk effect. Much more so than it would be without an underlay
4) Provide your wood floors with IXPE for moisture protection coming off the sub floor with its silver backing.
Roll Cover: | 18.6m2 |
Roll Width: | 1100mm |
Roll Overlap | 100mm |
Thickness | 2mm |
Moisture Resistance Foil | PE film |
Material: | IXPE |
Antimicrobial: | No |
Moisture Resistant | Yes |
Cushioning: | Yes |
Commercial / Residential: | Residential |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free
of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to
keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section
using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping
film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is
flush up against the other piece of underlayment and on top of the
overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.