Anhui Sinomining Machinery Co., Ltd |
Introduction
Flotation machine is applicable to grading of non-ferrous and
ferrous metal, also applicable to grading of nonmetals, such as
coal, fluorite and talc. The impeller of flotation machine is
driven by motor v-belt, centrifugal effect is thus produced and
negative pressure is formed, which, on the one hand, absorbs
adequate air to mix with ore pulp, and on the other hand, stirs the
ore pulp and mixes the ore pulp with medicines and refine bubbles;
thus, the minerals will be adhered to the bubbles and float to the
pulp surface and form foam layer. Adjust the opening of flash board
and cone valve and control the liquid level to make the useful
bubbles scraped out by scraper blade. For selection of flotation
machines, the following information shall be indicated: Models,
specifications and number of flotation cells. Number of scraper
blade devices (left or right). Single-side scraping or double-side
scraping. Numbers of feed boxes, middling boxes, tailing boxes,
feed pipes and middling pipes. Liquid level can be controlled
manually, electrically or automatically. Deployment diagram of
flotation technological process should be provided.
Application
Flotation machine is applicable for the separation of nonferrous
metal and ferrous metals, such as fluorite and talc. The impeller
is driven by V-belts, which can bring the centrifugal effect to
form negative pressure. While extracting sufficient air to mix with
ore pulp, the machine stirs ore pulp and mixes it with chemicals to
form mineralized froth. By adjusting the height Of the flash board
to control the liquid level, the useful froth can be scraped from
the loam board. The height of the strobe must be adjusted carefully
to keep the stabilization of liquid level and scrape the
mineralized froth to the launder. The impellers and stators should
be kept at a distance and should be changed when worn. The bearing
in the pump should be maintained every three months.
Features
XCF II /KYF II flotation machine is the flotation machine further developed based on XCF/KYF flotation machine. It adopts relatively deep U-shaped cell; hollow shaft for aeration and suspended stator; the blade of impeller is inclined to a degree, with little pressure head, large circulation volume, low power consumption and simple-structured new-type impeller; air distributor of porous circular shape was installed in the cavity of impeller to make air dispersed homogeneously. There are two models designed: XCF II and KYF II.
Main features:
Large aeration quantity, uniform gas dispersion, low energy consumption and saving 30~50% electricity compared with common flotation machine. Simple structure and convenient for maintenance. Low wear of quick-wear parts such as impeller and stator, saving 70~80% cost. Good circulation performance of ore pulp, low consumption of agents, saving 10~15% consumption. The combined unit can form flotation circuit by being deployed on the same horizontal level with no need for foam pump. If the user has requirements for automatic control device for the control of ore pulp and aeration quantity, multiple automatic control functions can be realized by manual/automatic switching and onsite/centralized control.
Application:
This machine is suitable for various flotation operations of roughing, scavenging and concentration of metal and non-metallic ores. The chosen range of material particle sizes is 0.3~0.01mm, and it is suitable for flotation of relative coarse ore particles.
Parameter
Models | Effective volume | Dimensions of cell | Diameter of impeller | Installed power | Min. wind pressure at the inlet | Adjusting range of aeration quantity | Production capacity | Single cell weight |
(L x W x H) | ||||||||
m2 | m | m | kw | kpa | m³/(m2.min)/(m'.min) | m³/min | kg | |
XCFII/KYFII-1 | 1 | 1.00×1.00×1.10 | 0.40/0.34 | 4-3 | >11 | 0.05-1.4 | 0.2-0.5/0.2-1 | 920/1056 |
XCFII/KYFII-2 | 2 | 1.30×1.30×1.25 | 0.47/0.41 | 5.5/4 | >12 | 0.05-1.4 | 0.5-1/0.5-2 | 1158/1346 |
XCFII/KYFII-3 | 3 | 1.60×1.60 × 1.40 | 0.54/0.48 | 7.5/5.5 | >14 | 0.05-1.4 | 0.7-1.5/0.7-3 | 2172/2074 |
XCFII/KYFII-4 | 4 | 1.80×1.80×1.50 | 0.62/0.55 | 11/7.5 | >15 | 0.05-1.4 | 1-2/1-4 | 2375/2100 |
XCFII/KYFII-6 | 6 | 2.05×2.05×1.75 | 0.62/0.55 | 18.5/11 | >17 | 0.05-1.4 | 1-3/1-6 | 3545/3278 |
XCFII/KYFII-8 | 8 | 2.20×2.20×1.95 | 0.72/0.63 | 22/15 | >19 | 0.05-1.4 | 2-4/2-8 | 4142/3857 |
XCFII/KYFII-10 | 10 | 2.40×2.40×2.10 | 0.76/0.66 | 30/22 | >20 | 0.05-1.4 | 3-5/3-10 | 4894/4334 |
XCFII/KYFII-16 | 16 | 2.80×2.80×2.40 | 0.86/0.74 | 37/22 | >23 | 0.05-1.4 | 4-8/4-16 | 6928/7545 |
XCFII/KYFII-20 | 20 | 3.00×3.00×2.70 | 0.91/0.78 | 45/37 | >25 | 0.05-1.4 | 5-10/5-20 | 9200/8240 |
XCFII/KYFII-24 | 24 | 3.10×3.10×2.90 | 0.93/0.80 | 55/37 | >27 | 0.05-1.4 | 6-12/6-24 | 10819/9820 |
XCFII/KYFII-30 | 30 | 3.50×3.50×3.025 | 0.88/0.90 | 55/45 | >31 | 0.05-1.4 | 7-15/7-30 | 14810/13820 |
XCFII/KYFII-40 | 40 | 3.80×3.80×3.40 | 1.05 | 75/55 | >32 | 0.05-1.4 | 8-19/8-38 | 18790/17097 |
XCFII/KYFII-50 | 50 | 4.40×4.40×3.50 | 1.20/1.03 | 90/75 | >33 | 0.05-1.4 | 10-25/10-40 | 22000 |
XCFII/KYFII-70 | 70 | 5.10×5.10×3.80 | 1.12 | 90 | >35 | 0.05-1.4 | 13-50 | 26200 |
XCFII/KYFII-100 | 100 | 5.90×5.90×4.20 | 1.26 | 132 | >40 | 0.05-1.4 | 20-60 | 33500 |
XCFII/KYFII-130 | 130 | 6.42×6.62×4.72 | 1.3 | 160 | >45 | 0.05-1.4 | 20-60 | 36200 |
XCFII/KYFII-160 | 160 | 6.85×7.02×5.02 | 1.35 | 160 | >48 | 0.05-1.4 | 20-60 | 42500 |
Why choose our company machine?
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine.
Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your
company provide spare parts?
Answer: The warranty period of our machine is one year. For those
wearing parts, we guarantee to provide high-quality parts for a
long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance
payment. Small machine is guaranteed to be delivered within one
month. Large-scale machine is guaranteed to be delivered within 2-3
months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation,
commissioning and operation guidance.