Low price 10-20% copper CCA CCAM HCCA raw material 0.12mm - 2.05mm
for Electrical cable network cable coaxial cable
Product Description
Copper-clad aluminum wire is widely used in the cable TV industry,
and copper-clad aluminum wire has become the standard material for
coaxial cables in the United States. Because the high-frequency
signal transmission runs on the outer layer of the wire, the
copper-clad aluminum wire can replace the copper wire of the same
specification. In low-frequency applications, the carrying capacity
of copper-clad aluminum is 65% of that of copper wires of the same
specification. Because of its light weight, it is also softer than
copper when large wire sizes are required. Copper-clad aluminum is
used for battery cables, welding cables, building cables and
electromagnetic wires. Because copper-clad aluminum is a composite
wire that combines the properties of two metals. Copper accounts
for 10% of the cross section of the wire, and its thickness is at
least 3.5% of the wire. The density of copper clad aluminum wire is
12 pounds per cubic inch (3.32 grams per cubic centimeter), which
is 37% of copper wire. Because of its economy, light weight, easy
operation and installation, it is very cost-effective to replace
copper wires in practical applications, and can be made into
various products, including concentric stranded wires, braided and
meshed structures, so it is widely used .
Specializing in the production of copper clad aluminum, tinned
copper clad aluminum, copper clad aluminum magnesium, copper clad
aluminum busbar, copper clad aluminum (magnesium) wire busbar,
small wire, copper clad copper, tinned wire and other products.
Copper-clad aluminum wire refers to a wire with an aluminum core
wire as the main body and a certain proportion of copper layer on
the outside. It can be used as a conductor for coaxial cables and a
wire and cable conductor for electrical equipment. The aluminum
wire has a small specific gravity, but its welding performance is
not good, so the aluminum wire is covered with a copper layer. This
copper-clad aluminum wire can not only take advantage of the small
specific gravity of aluminum, but also improve the welding
performance.
| Physical proerty: |
Type
Copper Volume | Copper in
Volume | Copper in
mass % | Length
Comparison | Density %
(g/cm3) | Max. DC
Resistivity
Ω.mm2/m(20℃) | Min.
Conductivity
(% IACS) |
| CCA -10% | 8 ~ 12 | 27 | 2.65:1 | 3.32 | 0.02743 | 63 |
| CCA -15% | 13 ~ 17 | 37 | 2.45:1 | 3.63 | 0.02676 | 65 |
| Copper | 100 | 100 | 1:1 | 8.89 | 0.01724 | 100 |
Category : CCAM CCA CU
Conductor OD:0.12mm 0.16mm 0.2mm 0.4-1mm
Copper Clad Aluminum and Magnesium alloy wire is an electrical
conductor which has an outer sleeve of coppermetallurgically bonded
to a solid aluminum alloy core.
The combination of these two metals make it uniquely suited to many
electrical applications
The mechanical property of CCAM fine wire can meet the requirement
of producing stranded wire, braided wire(on high speed braiding
machine).
We can produce CCAM wire based on customer’s requirement.
Technical Characteristics | Clad type | Plated type |
15H | 15A | Hard(H) | Anneal(A) |
Size range(mm) | 0.12-8.00 | 0.12-8.00 | 0.12-8.00 | 0.12-8.00 |
Copper content(%) by weight | 36-40 | 36-40 | 6-15 | 6-15 |
Conductivity(%)at 20℃ | 55 | 55 | 35-43 | 35-43 |
DC Resistivity(Ωmm2/m) | 0.03085 | 0.03085 | 0.04718 | 0.04718 |
Tensile strength (Mpa) | ≥220 | ≥160 | ≥250 | ≥180 |
Elongation(%) | ≥1 | ≥8 | ≥1 | ≥8 |
Density(g/cm3) | 3.63 | 3.63 | 2.85 | 2.85 |
Specification
Packing & Delivery
Company Profile
HUIZHOU ADP OPTICAL COMMUNICATIONS CO.,LTD was established in 2002
and is a professional manufacturer of Power cable 1mm2-500mm2,
Optical fiber cable 2-288 cores, Telecommunication Cable 1-1200
pairs, Coaxial Cable and accessories Our total manufacturing area
covers 8000 square meters, with a lot of international standards
cable equipment, such as high speed cross product lines, high speed
cross supervisor data return line systems (Zumbach), and a Cat6
twisters system. Our products strictly adhere to UL,ISO 9001, CE
and RoHS international standards, which also cover our design,
development, services, and management. We have more than 100
employees, including 20 technical personnel. Our annual production
value researches to USD 200,000,000, giving us stable development
and increased competitive power within the market. For the past ten
years since its foundation. we have been sticking to"equality.
mutual benefit and Quality First" foreign trade policies and we
have established extensive business relation with countries and
regions all over the world.Welcome to visit our factory.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: 30% T/T in advance, balance before shipment
1. Any inquiries will be replied within 24 hours.
2. OEM/ODM available
1) Printing your logo on the cable.
2) Printing your logo on the pull our box, make according to your
design.
3) Any your idea on cable, packing box are available.
3. High quality, reasonable and competitive price, fast lead time.
4. Good after-Sale Service.
1) All products will have been strictly Quality Checked in house
before packing.
2) All products will be well packed before shipping.
5. Faster delivery
Sample order in stock, and 3-7 days for bulk production.
6. Shipping:
We have strong cooperation with DHL, TNT, UPS, FEDEX, EMS, China
Air Post.
You also can choose your own shipping forwarders.
