HY-11.2 Ultrasonic Thickness Gauge High Precision Ultrasonic Coating Thickness Gauge

HY-11.2 High precision ultrasonic coating thickness gauge

Selling points:

1. Accuracy: 0.01mm

2.0.65mm-500mm large range

3. Automatic zero calibration, without manual zero calibration before measurement

4. Automatically identify the probe, allow the probe to be replaced at will, and insert two plugs of the probe without distinguishing the positive and negative

5. Standard, scanning, alarm, difference, high temperature, mean value, curved surface and other measurement modes are optional

6. The sound speed of the built-in 9 common materials can be directly selected, or the known sound speed can be manually input

7. Unknown materials can be determined by measuring the known thickness test block for single point calibration or two-point calibration

8. Special curved surface measurement mode is applicable to pipe wall thickness measurement to improve the measurement accuracy of curved surface thickness

9. Suitable for thickness measurement of metal, glass, plastic, rubber and other materials

10. Select probes with various frequencies, diameters and operating temperatures to meet various special thickness measurement applications (such as thin plates, pipes, extra thick materials, gray cast iron, high temperature materials, etc.)

11.2000 groups of measurement data mass data storage

12. Common functions only need to operate the shortcut keys on the panel, which is simple, intuitive and easy to learn. More functions need to be operated by entering the menu

13. Display unit can be selected between mm and inch

14. The measurement display interface displays real-time information such as sound speed, probe resonance frequency, coupling state, remaining battery power, measurement mode, etc

15. Backlight function, which can be used in no light environment

16. Low voltage or long-time idle automatic shutdown

17. Screen display rotation function, convenient for upside down instrument detection

Model HY-11.2

Measuring range (standard mode) 0.65mm~500mm (applicable to steel and probe sections)

Measurement range of penetrating coating/

Lower limit of surface measurement range Φ 15mm × 1.0mm(7.5MHz, Φ 6mm probe)

lower limit Φ 10mm × 1.2mm(7.5MHz, Φ 6mm probe)

Display precision 0.01mm/0.001 inch

Material sound velocity 509m/s ～ 18699m/s

Measurement accuracy ± (0.5% H+0.05) mm

Receiving bandwidth 1MHz ～ 10MHz (- 3dB)

Measuring frequency 2~20 times/s (settable)

Power supply 3VDC (two AA alkaline batteries)

280 hours of operation (automatic mode)

100 hours (backlight on)

Display 128 × 64 dot matrix LCD

Overall dimension 136 (L) × 72(W) × 20(H)mm

Weight 176g (including battery)

Operating temperature - 10 ～ ＋ 50 ℃

Operating humidity 20%~90% RH

Thickness of test block 3mm